User's Manual

USER’S GUIDE- 33
WIRELESS ACCESS MANAGEMENT SYSTEM
6. Click Back (bottom left of screen) to return to the Report Generator screen.
To create filtered report:
1. In the WAMS Reports main screen, select the Facility you wish to report on. In our
example, we created a facility called Test.
2. Under the User Reports box, click on Users Entry Log. In this report set up, more
selections are available for this report than for the Users of Readers report, including
Reader, User, and Report Timespans. You can use any or all of these selections to filter
your report. Each report type will have different selections available depending on the
data available for the report. The defaults are always All. In the following example, we are
filtering for Test Reader2, All Users, and All Timespans.
3. Under Report Settings, click on the Reader field then click the ellipsis button. The Select
Reader dialog box opens.
4. Clear the All Readers box just below the drop-down list box.
5. Select the reader you wish to filter for from the drop-down list.
6. Click Finish. The report results will display data for only the reader you selected.
Expanded
Group Tree
Locates the
reader
highlighted in
the Group
Tree