Specification Sheet

• For labeled fire doors, stairwell doors, motel and hotel guest room doors,
apartment unit entrance doors.
• Meets NFPA80 standard for 3 hour fire doors (NFPA-80 stipulates minimum of
2 spring hinges shall be used on labeled doors)
• 4
1
/
2
" (114mm) size – UL listed for door up to 4' x 8' (1219 x 2438mm)
• 4" (102mm) size – approved for door up to 3' x 7' (914 x 2134mm)
• 3
1
/
2
" (89mm) size – approved for door up to 2' 8" x 7' (813 x 2134mm)
• LifeSpan Limited lifetime warranty for the life of the building
• Internal ratchet mechanism eliminates loose adjustment pins
• Closing power is adjustable up or down
• Excellent alternative to more expensive overhead mounted closers
• Hinges can be furnished as follows:
with decorative tips
with electric switches (CS) – 4
1
/
2
" (114 mm) only
Special screw hole pattern
2
S P R I N G
SPRING HINGES
STANLEY ARCHITECTURAL HARDWARE
Full Mortise
Patented ratchet mechanism –
fast, precise, one-hand adjustment
- no locking pins to install
Advanced spring design –
square wire delivers 25% more
power
Safety locking screw –
prevents tampering with power
adjustment
Unique spring pintle –
eliminates spring tab breakage
LifeStan
®
bearings –
maintenance free, no grease or oil
required ever!
RD2068R –
5
/
8
" (16 mm)
RD2060R –
1
/
4
" (6 mm)
2060R – R- square
Fig. 1
Locking Pin
Fig. 2
Fig. 3
To Increase Torque (Fig 1)
• Close door
• Engage 5/32" hex wrench
• Rotate clockwise to increase torque
• Do not exceed 6 ratchet “clicks”
To Decrease Torque (Fig 2)
• Close door
• Engage 5/32" hex wrench
• Depress wrench to disengage ratchet
• Let wrench rotate counter-clockwise
to new setting
• Allow wrench to rise
Install Locking Safety Screw
(Fig 3)
• Install 6-32 5/8" recessed head
machine screw packed with hinge
2060R – (ANSI K81071F) Square corners – steel-polished and plated or phosphated and prime coated for painting
2060R (32) – (ANSI K51071F) Square corners – stainless steel – highly polished
2060R (32D) – (ANSI K51071F) Square corners – stainless steel – satin finish
RD2060R – (ANSI K81071F)
1
/
4
" (6mm) Radius corners – steel-polished and plated or phosphated and prime coated
for painting
RD2060R (32) – (
ANSI K51071F)
1
/
4
" (6mm) Radius corners – stainless steel – highly polished
RD2060R (32D) – (ANSI K51071F)
1
/
4
" (6mm) Radius corners – stainless steel – satin finish
RD2068R – (ANSI K81071F)
5
/
8
" (16mm) Radius corners – Steel-polished and plated or phosphated and prime coated
for painting
RD2068R (32) – (ANSI K51071F)
5
/
8
" (16mm) Radius corners – stainless steel – highly polished
RD2068R (32D) – (ANSI K51071F)
5
/
8
" (16mm) Radius corners – stainless steel – satin finish
Adjusting
Instructions