SDS

PRODUCT SAFETY DATA SHEET
Page 2 of 3 Issued 1/6/2014
None in normal handling conditions. Solid very difficult to burn.
Storage Conditions/Procedures
None
Incompatible Products:
None
Packaging:
None
* * * Section 8
-
Exposure Controls / Personal Protection * * *
Component Exposure Limits
Lung Dust: TWA = 5 mg/m3 (1987)
Vinyl Acetate: TWA = 10 mL/m3 = 30 mg/m3 (1987)
PERSONAL PROTECTIVE EQUIPMENT
Personal Protective Equipment: Eyes/Face
Safety goggles.
Personal Protective Equipment: Skin
Protective gloves where risk of skin contact.
Personal Protective Equipment: General
Never inhale fumes from hot glue.
* * * Section 9
-
Physical &
Chemical Properties * * *
Appearance
/Form
:
Solid
Odor:
Ester
Physical State:
Solid
pH:
NA
Vapor Pressure:
NA
Vapor Density:
NA
Boiling Point:
NA
Melting Point:
198 deg F
Solubility (H2O):
NA
Specific Gravity:
0.95
Evaporation Rate:
NA
VOC:
NA
Octanol/H2O Coeff.:
NA
Flash Point:
NA
Flash Point Method:
NA
Upper Flammability Limit (UFL):
NA
Lower Flammability Limit (LFL):
NA
Burning Rate:
NA
Auto Ignition:
NA
Decomposition Temperature:
Approx. 500 deg F
* * * Section 10
-
Chemical Stability & Reactivity Information * * *
Chemical Stability: Conditions to Avoid
Strong Oxidizing Agents
Incompatibility
Not Available.
Hazardous Decomposition
Thermal decomposition or combustion may produce carbon monoxide and/or carbon dioxide.
Possibility of Hazardous Reactions
Not Available.
* * * Section 11
-
Toxicological Information * * *
Acute Dose Effects:
No information available.
Local Effects:
No information available.