SDS

STANLEY CHALKS SDS
STANLEY CHALKS SDS
PAGE 8 OF 11
12. ECOLOGICAL INFORMATION (Continued)
OTHER ADVERSE EFFECTS: The components of these products are not listed as having ozone depletion potential.
EFFECT OF CHEMICAL ON AQUATIC LIFE: These products have not been tested for aquatic toxicity. Releases of large
quantities of this material may be detrimental to an aquatic environment.
13. DISPOSAL CONSIDERATIONS
PREPARING WASTES FOR DISPOSAL: Waste disposal must be in accordance with appropriate U.S. Federal, State, and
local regulations or with regulations of Canada. This product, if unaltered by use, may be disposed of by treatment at a
permitted facility or as advised by your local hazardous waste regulatory authority.
U.S. EPA WASTE NUMBER: Not applicable.
EUROPEAN EWC CODE: Wastes Not Otherwise Specified: 16 10 99
14. TRANSPORTATION INFORMATION
U.S. DEPARTMENT OF TRANSPORTATION REGULATIONS: These products are NOT classified as dangerous goods,
per U.S. DOT regulations, under 49 CFR 172.101.
TRANSPORT CANADA TRANSPORTATION OF DANGEROUS GOODS REGULATIONS: These products are NOT
classified as Dangerous Goods, per regulations of Transport Canada.
INTERNATIONAL AIR TRANSPORT ASSOCIATION (IATA): These products are NOT classified as Dangerous Goods, per
rules of IATA.
INTERNATIONAL MARITIME ORGANIZATION (IMO) DESIGNATION: These products are NOT classified as Dangerous
Goods, per rules of IMO.
EUROPEAN AGREEMENT CONCERNING THE INTERNATIONAL CARRIAGE OF DANGEROUS GOODS BY ROAD
(ADR): These products are NOT classified by the United Nations Economic Commission for Europe to be dangerous
goods.
TRANSPORT IN BULK ACCORDING TO THE IBC CODE: Not applicable.
ENVIRONMENTAL HAZARDS: These products do not meet the criteria of environmentally hazardous according to the
criteria of the UN Model Regulations (as reflected in the IMDG Code, ADR, RID, and ADN); components are not
specifically listed in Annex III under MARPOL 73/78.
15. REGULATORY INFORMATION
ADDITIONAL U.S. REGULATIONS:
U.S. SARA REPORTING REQUIREMENTS: The components of these products are not subject to the reporting requirements of
Sections 302, 304, and 313 of Title III of the Superfund Amendments and Reauthorization Act.
U.S. SARA THRESHOLD PLANNING QUANTITY: There are no specific Threshold Planning Quantities for the components of these
products. The default Federal SDS submission and inventory requirement filing threshold of 10,000 lb (4,540 kg) therefore applies, per
40 CFR 370.20.
U.S. CERCLA REPORTABLE QUANTITY (RQ): Not applicable.
U.S. TSCA INVENTORY STATUS: Components of these products are on the TSCA Inventory.
OTHER U.S. FEDERAL REGULATIONS: Not applicable.
CALIFORNIA SAFE DRINKING WATER AND TOXIC ENFORCEMENT ACT (PROPOSITION 65): Crystalline Silica is on the California
Proposition 65 lists. Carbon Black, with particles of respirable size, is on the Proposition 65 Lists as well. WARNING! These products
contain compounds known to the State of California to cause cancer.
ADDITIONAL CANADIAN REGULATIONS:
CANADIAN DSL/NDSL INVENTORY STATUS: The components of these products are on the DSL Inventory.
OTHER CANADIAN REGULATIONS: Not applicable.
CANADIAN ENVIRONMENTAL PROTECTION ACT (CEPA) PRIORITIES SUBSTANCES LISTS: The components of these products
are not on the CEPA Priority Substances Lists.
CANADIAN WHMIS CLASSIFICATION and SYMBOLS: Class D2A-Chronic Toxic Effects
ADDITIONAL EUROPEAN REGULATIONS:
SAFETY, HEALTH, AND ENVIRONMENTAL REGULATIONS/LEGISLATION SPECIFIC FOR THE PRODUCT: None applicable.
CHEMICAL SAFETY ASSESSMENT: No Data Available. The chemical safety assessment is required for some substances according
to European Union Regulation (EC) 1907/2006, Article 14.
16. OTHER INFORMATION
ANSI LABELING (Z129.1, Provided to Summarize Occupational Hazard Information): CAUTION! MAY CAUSE EYE AND
RESPIRATORY TRACT IRRITATION. CONTAINS CRYSTALLINE SILICA, WHICH IS A KNOWN HUMAN CARCINOGEN;
CONTAINS CARBON BLACK, WHICH IS A KNOWN ANIMAL CARCINOGEN. INGESTION MAY BE HARMFUL. Avoid
breathing dusts. Avoid contact with skin, eyes, and clothing. Keep container closed. Use with adequate ventilation.
Prevent dust accumulation. Wash thoroughly after handling. Wear gloves, goggles, dust mask, and appropriate body
protection during operations that can generate dust.