Stanley-Aoife-Eco Stove manual

COMMISSIONING & HANDOVER

On completion of the installation allow a suitable period of time for any fire cement and mortar to dry out, when

a small fire may be lit and checked to ensure the smoke and fumes are taken from the stove up the chimney

and emitted safely to the atmosphere. Do not run at full output for at least 24 hours.

On completion of the installation and commissioning ensure that the operating instructions for the stove are left

with the customer. Ensure to advise the customer on the correct use of the appliance with the fuels likely to be

used on the stove and warn them to use only the recommended fuels for the stove.

Advise the user what to do should smoke or fumes be emitted from the stove. The customer should be warned

to use a fire guard to BS 8423:2010 in the presence of children, aged and/or infirm persons.

STOVE DIMENSIONS

Fig.7

125

450

Note: Dimensions stated are in millimetres and may be subject to a slight +/- variation.

OPERATION

Check that all dampers and catches are operating

correctly and ensure that all flue connections are

thoroughly sealed.

AIR SETTINGS

The stove has three independent air controls.

1. The primary air control or spin valve. Rotate the

spin valve clockwise to close and anticlockwise to

open. (See Fig.8).

2. The secondary air control, this is located under

the base. Push to close and pull to open. (See

Fig.9).

3. Window wash air control, slide to the right to open

and to the left to close. (See Fig.9).

Fig.8

NOTE: The controls may become hot when the stove is in operation, use glove provided to adjust the

controls when the stove is hot.

Window Wash

Air Control

Closed Open

Secondary

Air Control

Push to Close

Pull to Open

Fig.9