Assembly Instruction

NOTE: Your furniture may have different design features than those shown in the drawing.
A-1210
Adjustable Glides are located in bottom of
FEET, as shown in the drawing. Turn
Adjustable Glide CLOCKWISE to lower case;
COUNTERCLOCKWISE to raise.
Cases should be LEVELED for proper
Door / Drawer Alignment.
Turn Counterclockwise to Raise
Turn Clockwise to Lower...
To remove ADJUSTABLE SHELVES, remove
SCREWS from SHELF SUPPORTS, then
carefully lift Shelves up and out of the cabinet.
To reposition ADJUSTABLE SHELVES, insert
Stem of SHELF SUPPORTS into Holes in End
Panels, as shown. Rest the SHELF on the
SHELF SUPPORTS, and reinstall SCREWS.
NOTE: If a Power Screwdriver is used, use a
"low torque" setting.
SCREWDRIVER
SHELF SUPPORT
HOLE