Owner manual

15
G
B
safety.
When fitting a tool, the flow of air in output must
beswitchedoff.
When using compressed air, you must know and
comply with the safety precautions to be adopted
foreachtypeofapplication(inflation,pneumatic
tools, painting, washing with water-based
detergentsonly,etc.).
2. LAYOUT
1. Shroud
2. Pressurevessel
3. Wheel
4. Supportingfoot
5. Quick-lockcoupling(regulatedcompressedair)
6. Pressuregauge(forreadingthepreset
pressurebymeansofregulator)
7. Pressureregulator
8. ON/OFFswitch
9. Transportationhandle
10.Safetyvalve
11. Receivercondensationdrainagetap
12.Pressuregauge(forreadingthetankpressure)
13.Axle
14.Clip
15.Bolt
16.Nut
17.Washer
3. SCOPE OF USE
The compressor is designed for generating
compressed air for tools operated by compressed
air.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businessesorforequivalentpurposes.
Themachineistobeusedonlyforits prescribed
purpose.Anyotheruseisdeemedtobeacaseof
misuse.Theuser/operatorandnotthemanufacturer
will be liable for any damage or injuries of any kind
causedasaresultofthis.
4. POINTS TO NOTE
WHEN SETTING UP THE
COMPRESSOR
● Examinethemachineforsignsoftransitdamage.
Report any damage immediately to the company
whichdeliveredthecompressor.
● The compressor should be set up near the
workingconsumer.
● Avoid long air lines and long supply lines
(extensions).
● Makesuretheintakeairisdryanddust-free.
● Do not set up the compressor in damp or wet
rooms.
● The compressor may only be used in suitable
rooms (with good ventilation and an ambient
temperature from +5°C to +40°C). There must
be no dust, acids, vapors, explosive gases or
inflammablegasesintheroom.
● Thecompressorisdesignedtobeusedindry
rooms. It is prohibited to use the compressor
in areas where work is conducted with sprayed
water.
5. ASSEMBLY AND STARTING
Warning!
You must fully assemble the appliance before
using it for the first time.
5.1 Fitting the wheels (Pic. 3 ÷ 4)
FitthesuppliedwheelsasshowninPic.3&4:
Pic.3a&3b:Assemblyofwheelkit-versionA
Assembly by sequence: a, b, c, d, e
Pic.4a&4b:Assemblyofwheelkit-versionB
5.2 Fitting the supporting foot (ref. 4)
FitthesuppliedrubberstopperasshowninPic.5.
5.3 Voltage
The compressor is equipped with a mains cable
withshock-proofplug.Thiscanbeconnectedtoany
230V~50Hzshock-proofsocketwhichisprotected