Operation Manual

G
B
19
Warning!
The condensation water from the pressure vessel
will contain residual oil. Dispose of the condensation
water in an environmentally compatible manner at
the appropriate collection point.
6.3 Safety valve (ref. 10)
The safety valve has been set for the highest permitted


valve from time to time to ensure that it works when



6.4 Storage
Warning!
Pull the mains plug out of the socket and ventilate
the appliance and all connected pneumatic tools.
Switch off the compressor and make sure that it is
secured in such a way that it cannot be started up
again by any unauthorized person.
Warning!
Store the compressor only in a dry location which
is not accessible to unauthorized persons.
Always store upright, never tilted!
7. DISPOSAL AND RECYCLING
The unit and its accessories are made of various types

Defective components must be disposed of as special

8. POSSIBLE FAULTS AND RELATED PERMITTED REMEDIES
FAULT CAUSE REMEDY
Leakage of air from the valve
of the pressure switch with the

Check valve that, due to wear or
dirt on the seal, does not perform

Unscrew the hexagonal head of
the check valve, clean the valve
seat and the special rubber disk





Excessive performance request,
check for any leaks from the




The compressor stops and restarts

Tripping of the thermal cutout due

Clean the air ducts in the

After a few attempts to restart, the

Tripping of the thermal cutout
due to overheating of the motor

compressor running, low power



The compressor will restart

The compressor does not stop and

Irregular functioning of the
compressor or breakage of the

Remove the plug and contact the

Any other type of operation must be carried out by authorized Service Centers, requesting original parts.
Tampering with the machine may impair its safety and in any case make the warranty null and void.