Specification Sheet

5 KNUCKLE HINGES
Full Mortise Standard Weight Plain Bearing
• Converts standard flush tip hinges
• Available in three styles, Ball • Crown • Steeple
• Same tips fit “CB”, “1900R” and “F” line hinges
• Conversion pins are stainless
• Conversion pins accept NRP screw
• Knurl eliminates pin rotation
• For heavy weight consult factory
Conversion Tips and Pins
S
ize Open Gauge Flat Head Screws/
of Metal Per Piece Quantity Steel Brass
Inches (mm) Inches (mm) Machine Wood Per Box Per Case Lbs. (Kg) Lbs. (Kg)
3 X 3* (76 X 76) .080 (2) 6 - 9 X
3
/
4
2 EA. 100 EA. 32 (15)
3
1
/
2
X
3 (89 X 76) .123 (3.1) 6 - 10-24 X
1
/
2
6 -10 X 1 2 EA. 100 EA. 60 (27) 64 (29)
3
1
/
2
X
3
1
/
2
(89 X 89) .123 (3.1) 6 - 10-24 X
1
/
2
6 -10 X 1 2 EA. 100 EA. 66 (30) 72 (33)
4
X 3
1
/
2
(102 X 89) .130 (3.3) 8 - 12-24 X
1
/
2
8 -12 X 1
1
/
4
3 EA. 48 EA. 38 (17) 44 (20)
4
X 4 (102 X 102) .130 (3.3) 8 - 12-24 X
1
/
2
8 -12 X 1
1
/
4
3 EA. 48 EA. 43 (20) 46 (21)
4
1
/
2
X
4 (114 X 102) .134 (3.4) 8 - 12-24 X
1
/
2
8 -12 X 1
1
/
4
3 EA. 48 EA. 51 (23) 54 (25)
4
1
/
2
X
4
1
/
2
(114 X 114) .134 (3.4) 8 - 12-24 X
1
/
2
8 -12 X 1
1
/
4
3 EA. 48 EA. 55 (25) 60 (27)
5
X 4 (127 X 102) .146 (3.7) 8 - 12-24 X
1
/
2
8 -12 X 1
1
/
4
3 EA. 30 EA. 40 (18) 43 (20)
5
X 4
1
/
2
(127 X 114) .146 (3.7) 8 - 12-24 X
1
/
2
8 -12 X 1
1
/
4
3 EA. 30 EA. 43 (20) 46 (21)
5
X 5* (127 X 127) .146 (3.7) 8 - 12-24 X
1
/
2
8 -12 X 1
1
/
4
3 EA. 30 EA. 46 (21) 51 (23)
*Steel only – for other substrates consult factory
F179 – (ANSI A8133 except for 3" x 3") Steel – polished and plated or phosphated and
prime coated for painting
F191 – (ANSI A2133) Brass or bronze – polished and plated or painted
F191 (32) – (ANSI A5133) Stainless steel – highly polished
F191 (32D) – (ANSI A5133) Stainless steel – satin finish
Case Weight
Ball Crown
Steeple
STANLEY ARCHITECTURAL HARDWARE
• For use on internal or external doors without door closers in hospitals,
churches, schools, airports, hotels, malls, apartment houses, office buildings, etc.
• All hinges have template screw hole location for use on either wood or hollow
metal doors and frames
• Use anti-friction bearing hinges on high and average frequency doors and all
doors equipped with door closers
• Hinges can be furnished with hospital tips (HT)
F173 – (ANSI A8433) Steel – polished and plated or phosphated and
prime coated for painting
• For low frequency kalamein or wood doors with hollow metal frames
(use ball bearing hinges on all doors equipped with door closers)
• Easily applied as only jamb leaf is mortised
• Packed with machine screws and grommet nuts
Measurements below
Size Width Offset Gauge Flat head Machine Quantity Quantity Case Weight
Length of Joint Frame Leaf Door Leaf of Metal Screws/Per Piece Per Box Per Case
(A) (B) (C)
Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm) Frame Leaf Door Leaf Lbs. (Kg)
4
1
/
2
(114) 2
1
/
16
(52.4) 2
9
/
16
(65.1)
9
/
16
(14.3) .134 (3.4) 4-12-24 X
1
/
2
3-
1
/
4
-20 X 2 3 EA. 30 EA. 37 (17)
F167 – (ANSI A8233) Steel – polished and plated or phosphated and
prime coated for painting
• For low frequency hollow metal or wood doors with channel iron frames
(use ball bearing hinges on all doors equipped with door closers)
• Easily applied as only door leaf is mortised
Measurements below
Size Width Offset Gauge Quantity & Size of Quantity Quantity Case Weight
Length of Joint Frame Leaf Door Leaf of Metal Screws/Per Piece Per Box Per Case
(A) (B) (C)
Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm) Frame Leaf Door Leaf Lbs. (Kg)
4
1
/
2
(114) 1
1
/
2
(38.1) 2
1
/
16
(52.4)
7
/
16
(11.1) .134 (3.4) 4-12-24 X
1
/
2
3-12-24 X
1
/
2
3 EA. 30 EA. 28 (13)
Pin
Standard weight Tips and Pins
Half Surface Standard Weight Plain Bearing
Half Mortise Standard Weight Plain Bearing
10M R1109
SAH009
© 2009 Stanley Security Solutions, Inc.
Product information contained in this catalog has been compiled and presented with as much care and completeness as is reasonably possible. However, errors
or mistakes may be present. Therefore, no guarantee can be made or should be assumed or implied with regards to product information contained in this catalog.