Hinge Template

Rev. No. 3/06

Template No. T45-01

FULL MORFULL MOR

FULL MOR

TISE TISE

TISE

TEMPLATEMPLA

TEMPLA

TE BTE B

TE B

UTT HINGESUTT HINGES

UTT HINGES

Sizes: 4½ × 4, 4½ × 4½, 4½ × 5, 4½ × 6, 4½ × 7 and 4½ × 8”

Template hinges of the hospital type conform to above screw hole location.

Hospital type hinges are designated by prefix “HT” to class number (except on #2060).

Also available in RD2060 1/4 radius corner and RD2068 5/8 radius corner.

Machine Screw Size — ½ × 12-24 F.H.

Wood Screw Size — 1¼ × No. 12 F.H.

This template conforms with ANSI standard A156.7.

1.125

4.500

.508 .5081.234 1.125

1.000

.375

(E)

Steel Nonferrous Gauge Outside

Hinges Hinges of Metal Diameter 4½ × 4 4½ × 4½ 4½ × 5 4½ × 6 4½ × 7 4½ × 8

F179 F191 0.134 0.605 1 5/8 1 29/32 2 5/32 2 21/32 3 5/32 2 21/32

1900 1960 0.134 0.540 1 5/8 1 13/16 — — — —

1900R 1960R 0.134 0.605 1 5/8 1 29/32 — — — —

CB179 CB191 0.134 0.625 1 5/8 1 25/32 2 3/32 2 19/32 — —

FBB179 FBB191 0.134 0.625 1 5/8 1 25/32 2 3/32 2 19/32 — —

CB1900 CB1960 0.134 0.540 1 5/8 1 13/16 — — — —

CB1900R CB1960R 0.134 0.625 1 5/8 1 25/32 2 3/32 2 19/32 — —

CB168 CB199 0.180 0.698 1 15/32 1 23/32 1 31/32 2 15/32 2 31/32 3 15/32

FBB168 FBB199 0.180 0.698 1 15/32 1 23/32 1 31/32 2 15/32 2 31/32 3 15/32

IHTCB168 IHTCB199 0.180 0.698 1 15/32 1 23/32 — — — —

— CB0701 0.180 0.698 1 15/32 1 23/32 — — — —

CB1901 CB1961 0.180 0.690 — 1 13/16 — — — —

CB1901R CB1961R 0.180 0.698 1 15/32 1 23/32 1 31/32 2 15/32 2 31/32 3 15/32

IHTCB1901 IHTCB1961 0.180 0.690 1 15/32 1 13/16 — — — —

IHTCB1901R IHTCB1961R 0.180 0.698 1 15/32 1 23/32 — — — —

2060R — 0.134 0.783 1 5/8 1 27/32 — — — —

DISTANCE FROM EDGE OF LEAF TO SWAGE LINE (F)

CLASS NUMBER

PAGE 1
Template No. T45-01 TISE TEMPLA FULL MOR MORTISE TEMPLATE BUTT TE B UTT HINGES Sizes: 4½ × 4, 4½ × 4½, 4½ × 5, 4½ × 6, 4½ × 7 and 4½ × 8” E 4 .5 00 F 1 .000 5/ 8 R .3 7 5 1/ 4 R .5 0 8 1/ 1 6 CLASS NUMBER Steel Nonferrous 1 .1 2 5 (E) Gauge Outside 1 .2 3 4 1 .1 2 5 .5 0 8 DISTANCE FROM EDGE OF LEAF TO SWAGE LINE (F) Hinges Hinges of Metal Diameter 4½ × 4 4½ × 4½ 4½ × 5 4½ × 6 4½ × 7 4½ × 8 F179 F191 0.134 0.605 1 5/8 1 29/32 2 5/32 2 21/32 3 5/32 2 21/32 1900 1960 0.