Technical Specifications

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If

equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FEATURES

CARACTERÍSTICAS

FEATURES

1. USB Power button

2. USB Charging Port (under protective cover)

3. 12 Volt DC Accessory Outlet (under protective cover)

4. USB power indicator

5. Battery Status LED Indicators

6. Reverse Polarity Indicator

7. Jump-Starter Power Switch

8. Pivoting LED Emergency Light

9. Battery Power Level Button

10. Area Light Power Switch

11. Built-in 120 Volt AC Charger

12. Positive (+) Red Clamp

13. Negative (–) Black Clamp

14. 12 Volt DC Charging Adapter

CARACTERÍSTICAS

1. Botón de la energía del USB

2. Puerto de carga del USB (bajo cubierta protectora)

3. Tomacorriente para accesorios de 12 V de CC (bajo cubierta

protectora)

4. Indicador de energía del USB

5. Indicadores de estado de la batería del LED

6. Indicador de polaridad inversa

7. Interruptor de encendido del puente auxiliar de arranque

8. Lúz LED giratoria para emergencias

9. Botón del nivel de energía de batería

10. Interruptor de encendido de la luz zonal

11. Cargador de CA de 120 voltios incorporado

12. Pinza roja del positivo (+)

13. Pinza negra del negativo (–)

14. Adaptador de carga de la CC de 12 voltios

12 13

J309_ManualENSP_070909.qxp 7/9/2009 11:43 AM Page 2