Use and Care Manual

ENGLISH

High Velocity Utility Fan Instruction Manual (MAC-310A-120)

MAINTENANCE AND CARE

• Before you clean or service your blower fan, be sure to

unplug it. Clean your blower fan using a soft moistened

cloth with a mild soap solution. Never immerse any

electrical parts partially or fully in water. Do not use

gasoline, benzene, thinner, harsh cleaners, etc. as

cleaning agents. When not in use, store blower fan in a

clean, dry area.

• Motor is permanently lubricated.

OPERATION

• Plug the blower fan into a properly grounded three-

pronged 120V AC receptacle. Using the knob on the side of

the blower fan, select the desired operating speed.

• You can adjust the blower fan's vertical angle. Do this by

moving the blower fan body forward or backward until

desired setting is met. A clicking sound emitting from the

fan while adjusting the angle is normal.

Breaker Reset:

• A 10-amp breaker is provided as a safety feature of your

blower fan. If a tool or accessory that has more amperage

than allowed is used, the breaker will trip and need to

reset. You can reset by unplugging the appliance or

accessory causing the breaker to trip and push the reset

button on the blower fan. This button is adjacent to the

fan's outlets.