Assembly Instruction

REMOVABLE PARTITIONS
To install REMOVABLE PARTITIONS,
locate WIRE SUPPORTS in the Upper and
Lower Shelves. Align Grooves in the Top
and Bottom Edges of the PARTITIONS
with the WIRE SUPPORTS, and carefully
slide the PARTITIONS between the Upper
and Lower WIRE SUPPORTS (as shown
below).
SHELF
LOWER
SUPPORTS
WIRE
SHELF
UPPER
GROOVE
REMOVABLE
PARTITION
ADJUSTABLE SHELVES
To remove ADJUSTABLE SHELVES,
remove SCREWS from SHELF
SUPPORTS, then carefully lift Shelves
up and out of the Armoire.
To reposition ADJUSTABLE
SHELVES, insert Stem of SHELF
SUPPORTS into Holes as shown.
Rest the SHELF on the SHELF
SUPPORTS, and reinstall SCREWS.
SCREWDRIVER
SHELF SUPPORT
SCREW
1. LIFT HUTCH ONTO LATERAL FILE:
Carefully lift the HUTCH onto the
LATERAL FILE and align it.
2. ATTACH HUTCH TO LATERAL FILE:
Align Back of the HUTCH with Back of the
LATERAL FILE, center and secure with
MENDING PLATES and SCREWS, as
shown.
NOTE: If a Power Screwdriver is used,
use a "low torque" setting.
LEVEL the BASE according to
the Instructions provided.
LEVELING:
NOTE: Your furniture may have different design features than those shown in the drawing.
95518-43 Lateral File Hutch
A-1250
MENDING
PLATES
BACK SIDE
HUTCH
BACK SIDE
LATERAL FILE
CAREFULLY READ AND
UNDERSTAND ALL
INSTRUCTIONS BEFORE
PROCEEDING!
CAUTION:
(2) OR MORE PERSONS
RECOMMENDED FOR
ASSEMBLY!