Specification Sheet

Rev. No. 2/06

Template No. T35-04

FULL MORFULL MOR

FULL MOR

TISE TISE

TISE

TEMPLATEMPLA

TEMPLA

TE SPRING HINGESTE SPRING HINGES

TE SPRING HINGES

Size: 3½ × 3½”

DO NOT SCALE

Machine Screw Size — 10-24 × ½ with No. 9 flat undercut head

Wood Screw Size — No. 9 × 1 F.H.

This template conforms with ANSI standard A156.7.

NOTE: Shimming may be required when used in mortises prepared to receive hinges

of thicker material, but to ANSI specifications.

Class No. Gauge of Metal Outside Dia. A B Corner

2060R Square

RD2060R 0.250 R.

RD2068R 0.625 R.

0.099 0.700

PAGE 1
Template No. T35-04 TISE TEMPLA TE SPRING HINGES FULL MOR MORTISE TEMPLATE Size: 3½ × 3½” DO NOT SCALE NOTE: Shimming may be required when used in mortises prepared to receive hinges of thicker material, but to ANSI specifications. Class No. Gauge of Metal Outside Dia. A 2060R RD2060R B Corner Square 0.099 0.700 RD2068R 0.250 R. 0.625 R. Machine Screw Size — 10-24 × ½ with No. 9 flat undercut head Wood Screw Size — No. 9 × 1 F.H. This template conforms with ANSI standard A156.7. Rev. No.