SCD12 English French Russian Turkish Portugese Arabic 4-14 15-25 16-26 27-37 38-48 49-59
FIG. A 5 4 3 2 8 9 1 6 7 FIG.
FIG. D FIG. C 3 4 6 7 FIG. E FIG. F FIG. G FIG.
ENGLISH Intended use Your Stanley SCD12 10.8V Li-Ion Drill Driver has been designed for light fastening and drilling applications. This tool is intended for semi-professional and professional use. Safety instructions General power tool safety warnings WARNING! Read all safety warnings and instructions. Failure to follow the warnings and instructions may result Save all warnings and instructions for future reference.
ENGLISH c. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e. Maintain power tools.
ENGLISH LABELS ON TOOL The label on your tool may include the following pictographs along with the date code: WARNING! To reduce the risk of injury, the user must read the instruction manual. Read instruction manual before use. Always wear safety goggles. Always wear safety hearing protection. POSITION OF DATE CODE The Date Code, which also includes the year of manufacture, is printed into the housing.
ENGLISH • Plug the charger (10) into an appropriate outlet before inserting battery pack. • Insert the battery pack (7) into the charger. The red (charging) light will blink continuously indicating that the charging process has started. • The completion of charge will be indicated by the red light remaining ON continuously. The pack is fully charged and may be used at this time or left in the charger.
ENGLISH battery performance and life, store battery packs at room temperature when not in use. liquid organic carbonates and lithium salts. • Contents of opened battery cells may cause respiratory irritation. Provide fresh air. If symptoms persists, seek medical attention. WARNING: Burn hazard. Battery liquid may be flammable if exposed to spark or flame.
ENGLISH Do not incinerate the battery pack. Package Contents The package contains: 1 Drill/driver 1 Charger 2 Batteries (S2) or 1 Battery (S1) 1 Instruction manual NOTE: Battery packs and chargers are not included with N-models. •Check for damage to the tool, parts or accessories which may have occurred during transport. • Take the time to thoroughly read and understand this manual prior to operation. Description (Fig. A) WARNING: Never modify the power tool or any part of it.
ENGLISH WARNING: To reduce the risk of serious personal injury, ALWAYS hold securely in anticipation of a sudden reaction. Proper hand position requires one hand on the main handle (i). Trigger Switch (Fig. A) To turn the tool on, squeeze the trigger switch (1). To turn the tool off, release the trigger switch. Your tool is equipped with a brake. The chuck will stop when the trigger switch is fully released. The variable speed switch enables you to select the best speed for a particular application.
ENGLISH Chuck installation (FIG. G) Screw the chuck on by hand as far as it will go and insert screw (left-hand thread). Tighten screw securely. Tighten the chuck around the shorter end of a 6.35 mm (1/4") or larger hex key (not supplied) strike the longer end in the clockwise direction with a wooden mallet, as shown. Tighten the screw once again by turning in a counterclockwise direction.
ENGLISH WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool. These chemicals may weaken the materials used in these parts. Use a cloth dampened only with water and mild soap. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid. Charger Cleaning Instructions WARNING: Shock hazard. Disconnect the charger from the AC outlet before cleaning.
ENGLISH Technical data SPECIFICATION Voltage No-load speed: 1st gear 2nd gear Max torque Power output (MWO) Chuck capacity Maximum drilling capacity: Wood Meta CHARGER Input Voltage Output Voltage Output Current(DC) Approx. charge time Battery Voltage Capacity Type SCD12 VDC 10.8 min-1 min-1 Nm W mm 0–400 0–1500 26 180 10 mm mm 20 10 SC121 220-240 22 1.25 70(1.5Ah) SB12S 10.8 1.
ENGLISH EC declaration of conformity MACHINERY DIRECTIVE SCD12-Drill/Screwdriver STANLEY declares that these products described under "technical data" are in compliance with: 2006/42/EC, EN 60745-1:2009 + A11:2010, EN 60745-2-1:2010 EN 60745-2-2:2010 These products also comply with Directive 2004/108/EC (until 19/04/2016) 2014/30/EU (from 20/04/2016) and 2011/65/EU. For more information, please contact STANLEY at the following address or refer to the back of the manual.
