Instructions

5
ENGLISH
(Original instructions)
Replace the charger if the lead is
damaged or defective.
u Never attempt to remove or replace
any parts other than those specied in
this manual.
Additional safety instructions
u The inator should not be used as a
vacuum cleaner (suck up dirt, debris,
or materials). It can be used as a
deator (removing air from inatable
products).
u Inate bike tyres, balls, rafts,
swimming pool oats, air mattresses,
and more in and around the home.
Recommended maximum continuous
duty at 65 psi is 2 minutes on with 5
minutes off.
u The compressed air from your inator
is not safe for breathing. Never
inhale air from your inator or from
a breathing device connected to the
inator.
u Too much air pressure causes a
hazardous risk of bursting.
Check the manufacturer’s maximum
pressure rating for objects being
inated.
u Do not leave inator running
unattended. It could burst tyres or
other items.
u Use a tire gauge to check the tyres
pressure before each use and while
inating tyres; see the tyre sidewall for
the correct tyre pressure.
u Do not modify or attempt to repair.
Never drill into, weld, or make any
modications to the inator or its
attachments.
u Operate only with the accessories in-
cluded or air handling parts acceptable
for not less than 160 psi.
u The use of any accessory not recom-
mended for use with this tool could
be hazardous.
u Never “horseplay.” High pressure air
is dangerous. Don’t direct air-ow at
yourself or others.
Warning! Always leave the valve adaptor
lever open when not in use.
u Inator can become hot during use.
Allow inator to cool 30 minutes before
storing away.
After use
u Unplug the charger before cleaning.
u When not in use, the appliance should
be stored in a dry place.
u Children should not have access to
stored appliances.
Residual risks
Additional residual risks may arise when
using the tool which may not be included
in the enclosed safety warnings. These
risks can arise from misuse, prolonged
use etc.
Even with the application of the relevant
safety regulations and the implementa-
tion of safety devices, certain residual
risks can not be avoided. These include:
u Injuries caused by touching any
rotating/moving parts.