Instructions

9
ENGLISH
(Original instructions)
Then, rmly slide in the hose so it
is securly in place.
u Insert the hose, or it’s tapered nozzle (8) into the object
being deated.
u Press the high-volume side of the mode power
switch (2), indicated by the air mattress symbol.
u To turn off, push the power switch to the center position.
u To remove the hose, twist the hose counterclockwise
and slide hose off.
Setting the automatic shut-off pressure
Note: The digital readout will only show ination pressures
when the inator is being used. In both ination and pump
mode the unit will show battery status.
u To switch between the different units (psi, bar or kPa),
press the pressure mode/reset button (5) until the required
units are displayed.
u Press the - or + pressure setting buttons (4) until the
required pressure is displayed.
u After 3 seconds the display will ash and return to a
reading of “0.0”. This is normal.
u Connect the universal valve adapter (9) and accessories,
if required, to the item to be inated, making sure that
the lever of the universal valve adapter is in the down
position to lock it in place.
u To start the inator press the mode power switch (2),
towards the side of the tire symbol.
u When the item to be inated has reached the preset
value the unit will automatically turn off.
NOTE: You may notice the actual pressure reading may
drop after a couple of seconds. This is normal.
7. To stop the inator at any time, press the main power
button back to the center position.
Note: If the AC/DC power switch is turned off, all settings
will be lost and will need to be reentered. This is a safety
feature to prevent the risk of items OVER INFLATING.
Using the inator as a pressure gauge
u Connect the universal valve adapter (9) to the item to
be checked.
u Press the mode power switch (2), on the side of the tire
symbol.
u The digital readout will display the item’s pressure.
u After checking, press the mode power switch (2) back
to the center position and return the air hose to the
storage location.
Maintenance
Your STANLEY FATMAX corded and cordless appliance has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on cordless
appliances:
u Run the battery down completely if it is integral and then
switch off.
u Unplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular cleaning.
u Regularly clean the ventilation slots in your appliance/
charger using a soft brush or dry cloth.
u Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
u If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualied
persons in order to avoid a hazard .
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical Data
SFMCE520
Voltage 18V, 230ac and 12V vehicle voltage
Weight 2.21 Kg
Charger SFMCB11 SFMCB12 SFMCB14
Input Voltage
V
AC
230 230 230
Output Voltage
V
DC
18 18 18
Current A 1.25 2 4
Battery
SFMCB201 SFMCB202 SFMCB204 SFMCB206
Voltage V
DC
18 18 18 18
Capacity Ah
1.5 2.0 4.0 6.0
Type
Li-Ion Li-Ion Li-Ion Li-Ion
Guarantee
STANLEY FATMAX is confident of the quality of its products
and offers consumers a 12 month guarantee from the date
of purchase. This guarantee is in addition to and in no way
prejudices your statutory rights. The guarantee is valid within
the territories of the Member States of the European Union
and the European Free Trade Area.
To claim on the guarantee, the claim must be in accordance
with STANLEY FATMAX Terms and Conditions and you will
need to submit proof of purchase to the seller or an authorised
repair agent.