Use and Care Manual

EMPTY THE TANK
To reduce the risk of injury from accidental starting, unplug power cord before emptying the dust tank.
1. Remove the power head assembly of the wet/dry vac by pulling outward on the lid clips located
on each side of the vac. Lift off the power head assembly.
Dump the tank contents into the proper waste disposal container.
OPERATING INSTRUCTIONS
8
Your vac contains a blowing feature. It has the capability to blow sawdust and other debris. It can be
used to blow dust and debris out of garages or off patios and driveways. Follow the steps below to
use your vac as a blower.
1. Locate blowing port on your vac.
2. Insert one end of the hose into the blowing port.
3. Turn vac “ON”.
BLOWING OPERATION
WARNING:
Always wear safety eyewear complying with ANSI Z87.1 in USA or
CSA Z94.3 in Canada when using as a blower.
WARNING: To avoid injury to bystanders, keep them clear of blowing debris.
CAUTION: Wear a dust mask if blowing creates dust which might be inhaled.
CAUTION: To reduce the risk of hearing damage, wear ear protectors when using the
vac/blower for extended hours or when using it in a noisy area.
WARNING: