SDS

MSDS No. 220-99 Ad-Tech 220 page 3 of 3
Section 8 - Exposure Controls / Personal Protection
Engineering Controls: Local ventilation recommended.
Ventilation: Provide general or local exhaust ventilation to areas using this adhesive. Local exhaust ventilation is preferred
because it prevents contaminant dispersion into the work area by controlling it at its source.
Administrative Controls: Not applicable.
Respiratory Protection: Not required under normal use.
Protective Clothing/Equipment: Wear protective gloves and long sleeved shirt to prevent skin contact. Wear protective
eyeglasses or safety goggles, per OSHA eye- and face-protection regulations (29 CFR 1910.133). Contact lenses are not eye
protective devices. Appropriate eye protection must be worn instead of, or in conjunction with contact lenses.
Safety Stations: Make emergency eyewash stations, safety/quick-drench showers, and washing facilities available in work area.
Contaminated Equipment: Cooled adhesive may be removed from clothing by freezing affected area and picking off.
Comments: Never eat, drink, or smoke in work areas. Practice good personal hygiene after using this material, especially before
eating, drinking, smoking, using the toilet, or applying cosmetics.
Section 9 - Special Precautions and Comments
Handling Precautions: No special handling necessary.
Storage Requirements: Store in cool dark area.
Prepared By: Dennis Fitzmeyer.
Revision Notes: Revised 8-25-03
Disclaimer:
The information provided here represents our current data and best opinion as to the proper use in handling of this material
under normal conditions. Any use of the material which is not in conformance with this data sheet or which involves using the
material in combination with any other material or any other process is the responsibility of the user.