ELECTRIC PRESSURE WASHER 1600W 1740PSI SXEW174001 03649 08/18 MODEL NO.
SUGGESTED APPLICATIONS CONTENTS These are some suggested articles which could be cleaned by this pressure washer: • Concrete driveway • Paved area • Car • Motorbike • Truck • Wall Section • Garden feature TECHNICAL INFORMATION Specifications Page Suggested Applications 2 Technical Information 2 Introduction 3 Warranty 3–4 General Safety Instructions 5–6 Personal Safety Instructions 7 Specific Safety Instructions 8 9 Pressure washer SXEW174001 Maximum pressure 1740PSI Components
INTRODUCTION Dear Customer, HOW TO CLAIM UNDER THIS WARRANTY Thank you for purchasing this pressure washer which has passed through our extensive quality assurance processes. Every care has been taken to ensure that it reaches you in perfect condition. However, in the unlikely event that you should experience a problem, or if you require any assistance please do not hesitate to contact us; If you have a problem, call customer service do not return this pressure washer to the place of purchase.
COMPLETE WARRANTY STATEMENT – PRESSURE WASHER As soon as you have purchased the pressure washer, we recommend that you check to make sure it is intact and that you read the operating instructions carefully before using it. The purchase receipt for this product is to be retained and must be presented if making a claim under the terms of the Smart Marketing Group (SMG) warranty. Bank account statements are not acceptable for proof of purchase.
GENERAL SAFETY INSTRUCTIONS SELECT A PRESSURE WASHER WITH A SUFFICIENT RATING ASSEMBLY This pressure washer MUST be fully assembled by you prior to use. Failure to do so will result in the warranty being VOID. Failure to fully assemble this pressure washer may also result in personal injury. Select the right pressure washer for the job. Do not use a pressure washer to do a job for which it was not designed. Do not force a small pressure washer to do the job of a heavy duty pressure washer.
GENERAL SAFETY INSTRUCTIONS MAINTAIN YOUR PRESSURE WASHER WITH CARE CLEANING YOUR PRESSURE WASHER When not using your pressure washer ensure the ON/OFF switch is ‘OFF’. Never leave the ON/OFF switch ‘ON’ as this can damage the pressure washer, and is also a danger if it is started with the switch ‘ON’ and the power cord is plugged in. Follow the instructions for lubricating and changing accessories. Keep handles clean, dry and free from oil and grease.
PERSONAL SAFETY INSTRUCTIONS CLOTHING RESPIRATORY PROTECTION Do not wear loose clothing, jewellery or anything that could get caught in moving machinery. Always wear approved breathing protection when decanting fuel. ALWAYS use this pressure washer in well ventilated area. NEVER use indoors. WARNING! DO NOT breathe in exhaust fumes. Exhaust fumes are poisonous and may cause drowsiness, unconsciousness and even death.
SPECIFIC SAFETY INSTRUCTIONS Warning! Do not use the pressure washer in areas where there is a risk of explosion or fire from combustible materials. The sparks possibly caused when using this pressure washer may ignite combustible materials as well as flammable liquids, paint, varnish, petrol, flammable gases and dust of an explosive nature. As a precaution it is recommended that you consult an expert on a suitable fire extinguisher and its use.
PIC. 1 6 4 3 5 9 2 7 8 11 10 1. Power cord and plug (not shown) 2. On / Off Switch 3. Hose & power cord holder 4. Gun with trigger 5. High pressure hose 6. Handle 7. Lance 8. High pressure hose connection 9. Gun and accessories hook 10. Adjustable nozzle 11.
UNPACKING & ASSEMBLY PIC. 2 UNPACKING Note: Carefully unpack your pressure washer. Dispose of all packing material in an environmentally responsible manner. Open carton, gently lift the pressure washer clear of the carton and packaging, Remove from plastic bag. Note: Plastic bags can be a danger to young children, dispose of immediately. Always dispose of packaging in a responsible manner. Your Pressure Washer needs minor assembly before use CONNECTING LANCE TO GUN (PIC.
HOSE HOLDER (PIC. 4A) PIC. 4A Fit hose holder by; 1. Hold holder against the handle 2. Secure with 4 screws and tighten fully. HANDLE (PIC. 4B) Fit handle by; 1. Push handle onto pressure washer frame. 2. Secure with 2 screws and tighten fully by hand. PRESSURE HOSE TO PUMP CONNECTION (PIC. 5) To connect hose; 1. Push lever in towards the left and push the hose fitting in, release the lever. Hose fitting should be locked in place. PIC. 4B PIC.
UNPACKING & ASSEMBLY PIC. 6 PRESSURE HOSE TO GUN CONNECTION (PIC. 6) To connect hose; Push hose lever in towards the gun and push the hose fitting in, release the hose lever. Hose fitting should be locked in place. GARDEN CONNECTION (PIC. 7) Screw clear garden hose/filter connection to pump. HOSE LEVER PUSH IN PIC.
OPERATING INSTRUCTIONS PIC. 8 WARNING: THIS UNIT IS INTENDED TO BE USED WITH COLD WATER ONLY! DO NOT USE HOT WATER IN THIS PRESSURE CLEANER! STARTING AND STOPPING YOUR PRESSURE CLEANER Never switch your pressure cleaner ON unless the water has been turned on and connected to the pressure cleaner first. Your pressure cleaner is equipped with an automatic on/off switch.
NOZZLES MAINTENANCE INFORMATION Your pressure washer is supplied with these nozzles; It is recommended after every use or when required that following items are cleaned. ADJUSTABLE NOZZLE (PIC. 9) NOZZLE This nozzle can be adjusted while in use there is no need to stop the water flow. When the nozzle is clogged, it will cause the pump to build pressure and may cause unit to surge, you can clean the nozzle inserting needle into the tip to rid of the deposits.
CLEANING TIPS Always clean from top to bottom and from left to right. For stubborn dirt/stains you can use the turbo nozzle. Be careful as the turbo nozzle may damage timber or some surfaces if held too close or too long on the area. RECOMMENDATIONS If painted surfaces are peeling or chipping, use extreme caution as pressure washer may remove the loose paint from the surface. Note: Always pre-test any paint work in an inconspicuous area in case of paint damage.
TROUBLE SHOOTING WHEN THE SWITCH IS IN THE “I” POSITION THE MACHINE WILL NOT START Possible Cause Suggested Fix Electrical socket is faulty Check plug, socket, fuses Power cord is not plugged in Plug in power cord THE PUMP DOES NOT REACH ADEQUATE PRESSURE OR FLUCTUATES Water inlet filter is clogged Remove and clean filter Pump is drawing air Tighten connections/bleed system Suction valves are clogged/worn Clean or replace valves Black detergent nozzle is attached Remove detergent nozzle and att
