User Manual

TROUBLE SHOOTING

PARTS DIAGRAM

Part Description Part No.

1 Handle 84 EW1740H

2 Gun 84 EW1740GT

3 Gun Holder 84 EW1740GH

4 Nozzle 84 EW1740N

5 Hose & Power Cord Holder 84 EW1740PCH

User replaceable parts listed below. All other parts must be

serviced/replaced by an authorised service agent.

WHEN THE SWITCH IS IN THE “I” POSITION THE MACHINE WILL NOT START

Possible Cause Suggested Fix

Electrical socket is faulty Check plug, socket, fuses

Power cord is not plugged in Plug in power cord

THE PUMP DOES NOT REACH ADEQUATE PRESSURE OR FLUCTUATES

Water inlet filter is clogged Remove and clean filter

Pump is drawing air Tighten connections/bleed system

Suction valves are clogged/worn Clean or replace valves

Black detergent nozzle is attached Remove detergent nozzle and attach a high pressure nozzle

Diameter of garden hose too small Replace with 12mm or bigger garden hose

Water supply is restricted Check hose for kinks or leaks

Insufficient water supply Fully open water source

THE PRESSURE CLEANER HAS OR WILL NOT MAINTAIN PRESSURE

Excessive air in waterline and pump Turn unit off / bleed system

THE PRESSURE CLEANER MAKES EXCESSIVE NOISE

Filter is dirty Check, clean, or replace filter

STANLEY®, The STANLEY Logo, The Notched Rectangle and the Yellow and

Black Diagonal Package Design are all trademarks of the Stanley Black & Decker,

Inc or an afﬁliate thereof and are used under license. Product manufactured

and distributed by Smart Marketing Group Pty Ltd. Manufactured in China.