Operation Manual

6
Menu functions
Stanley TLM 220i 773938a en
EN
D
F
I
E
P
NL
N
S
DK
FIN
RUS
PL
GR
H
CZ
SK
LT
EST
LV
RO
BG
key or the key.
)
Parallax errors occur when the digital pointfinder is used on close
targets, the laser dot may appear displaced in the crosshair. In this case you
should rely on the actual laser dot for targeting the object.
See drawing {F.2}
1 Zoom step (1x, 2x, 4x)
2Timer
3 Level (in °)
4Crosshairs
5 Inclination angle
6 Distance tracking value
7 Image
Menu functions
Settings
Various device settings can be made in the menu. A vertical list shows each
entry. In this menu the selection field (cursor) remains stationary and the
list moves in a vertical direction. Starting from the centre of the list, the
priority of list entries starts at the top and fans out clockwise. See drawing
{G}.
The menu contains following items:
1 Units of measurement (distance)
2 Units of measurement (angle)
3Beep
4 Digital Pointfinder image in black/white
5 Reset
6 Calibrate tilt sensor
7 Level in status field (in °)
8 Offset
9Tripod
10 Display illumination
Navigation in the menu
The menu allows settings to be customized for a particular user or applica-
tion.
General description
Press and hold the key to enter the Setup menu.
By pressing the or keys, navigate through the main menu items
in the menu.
Press the key briefly to enter the submenu of the selected main
menu item.
By pressing the or keys you can make the alterations in the
submenu.
Press and hold the key to accept the settings.
Pressing the button for longer in the menu allows you to quit the
settings function without saving.