Datasheet

Produc
t code
:
7716
EN (English) Revision date: 11/13/2017 3/8
5.2. Special hazards arising from the substance or mixture
Ha
zardous combustion products
Toxic fumes may be released.
5.3. Advice for firefighters
Protection during firefighting
Do not attempt to take action without suitable
protective equipment. Self
-
contained breathing apparatus. Complete protective clothing.
6. SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
For non-emergency personnel
Protective equipment
Keep unnecessary personnel away. Keep people away from and
upwind of
spill/leak. Wear appropriate protective equipment and clothing during clean-up.
Do not touch damaged containers or spilled material unless wearing appropriate
protective clothing.
Emergency procedures
Ventilate spillage area. Avoid contact with skin and eyes
.
For emergency responders
Protective equipment
Do not attempt to take action without suitable protective
equipment. For further
information refer to section 8: "Exposure controls/personal protection".
6.2. Environmental precautions
Avoid release to the environment.
6.3. Methods and material for containment and cleaning up
For containment
Collect spillage. Prevent entry into waterways, sewer,
basements or confined
areas.
Methods for cleaning up
Stop the flow of material, if this is without
risk. Large Spills: Dike the spilled
material, where this is possible. Cover with plastic sheet to prevent spreading.
Following product recovery, flush area with water. Small spills: Absorb in
vermiculite, dry sand or earth and place into containers. Clean surface
thoroughly to remove residual contamination.
Other information
Dispose of materials or solid residues at an authorized site
. Never return spills in
original containers for re-use.
6.4. Reference to other sections
For disposal of residues refer to section 13 : Disposal considerations" ". For
further information refer to section 8: "Exposure controls/personal protection".
7. SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling
Ensure good ventilation of the work station. Avoid
contact with
skin and eyes.
Wear personal protective equipment.
Hygiene measures
Wash contaminated clothing before reuse. Do not
eat, drink or smoke when
using this product. Always wash hands after handling the product.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions
Store in original tightly closed container. Store in
a well
-
ventilated place. Keep
cool.
7.3. Specific end use(s)
Soft soldering.
8. SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Contains no substances with occupational exposure limits.
DNEL: Derived no
effect level
No data available