Datasheet

ManualsBrandsStannol ManualsSolderSolder Wire HS 10 217°C 0.5mm

Page 1/6

Safety data sheet

according to 1907/2006/EC, Article 31

Printing date 10.04.2018 Revision: 10.04.2018Version number 4

46.1.13

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1 Product identifier

Trade name: Lötdraht HS10 Ecoloy TSC

1.2 Relevant identified uses of the substance or mixture and uses advised against

Technical function

soldering

Application of the substance / the mixture

Brazing alloy

1.3 Details of the supplier of the safety data sheet

Manufacturer/Supplier:

Stannol GmbH

Haberstr. 24

D-42551 Velbert

Deutschland

+49/2051-3120-332

sdb@stannol.de

Further information obtainable from:

Product Safety Department

1.4 Emergency telephone number:

8:00 am - 5:00 pm (CET) +49 (0) 2051 3120 332

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture

Classification according to Regulation (EC) No 1272/2008

Skin Sens. 1 H317 May cause an allergic skin reaction.

2.2 Label elements

Labelling according to Regulation (EC) No 1272/2008

The product is classified and labelled according to the CLP regulation.

Hazard pictograms

d~

GHS07

Signal word

Warning

Hazard-determining components of labelling:

Rosin

Hazard statements

H317 May cause an allergic skin reaction.

Precautionary statements

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.

P272 Contaminated work clothing should not be allowed out of the workplace.

P280 Wear protective gloves.

P333+P313 If skin irritation or rash occurs: Get medical advice/attention.

P321 Specific treatment (see on this label).

P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

2.3 Other hazards

Inhalation of vapors that are released during the soldering process should be avoided. Flux fumes will irritate nose,

throat and lungs and may cause allergic reaction (asthma) after prolonged or repeated exposure. Therefore, we

recommend the usage of fume extractions with appropriate filters.

Always wash your hands carefully with soap and water after handling the product before eating, drinking and smoking.

Do not heat the soldering materials above 500 °C.

Keep out of reach of children.

May cause occupational asthma

Results of PBT and vPvB assessment

PBT:

Not applicable.

vPvB:

Not applicable.

(Contd. on page 2)

Summary of content (6 pages)

PAGE 1
46.1.13 Page 1/6 Safety data sheet according to 1907/2006/EC, Article 31 Printing date 10.04.2018 Version number 4 Revision: 10.04.2018 SECTION 1: Identification of the substance/mixture and of the company/undertaking · 1.1 Product identifier · Trade name: Lötdraht HS10 Ecoloy TSC · 1.2 Relevant identified uses of the substance or mixture and uses advised against · Technical function soldering · Application of the substance / the mixture Brazing alloy · 1.
PAGE 2
46.1.13 Page 2/6 Safety data sheet according to 1907/2006/EC, Article 31 Printing date 10.04.2018 Version number 4 Revision: 10.04.2018 Trade name: Lötdraht HS10 Ecoloy TSC (Contd. of page 1) SECTION 3: Composition/information on ingredients · 3.2 Mixtures · Description: Mixture of substances listed below with nonhazardous additions. · Dangerous components: CAS: 7440-22-4 silver substance with a Community workplace exposure limit 2-9% EINECS: 231-131-3 CAS: 8050-09-7 Rosin ≤2.5% Skin Sens.
PAGE 3
46.1.13 Page 3/6 Safety data sheet according to 1907/2006/EC, Article 31 Printing date 10.04.2018 Version number 4 Revision: 10.04.2018 Trade name: Lötdraht HS10 Ecoloy TSC (Contd. of page 2) · Information about storage in one common storage facility: Not required. · Further information about storage conditions: None. · 7.3 Specific end use(s) No further relevant information available.
PAGE 4
6.1.13 Page 4/6 Safety data sheet according to 1907/2006/EC, Article 31 Printing date 10.04.2018 Version number 4 Revision: 10.04.2018 Trade name: Lötdraht HS10 Ecoloy TSC (Contd. of page 3) · Change in condition Melting point/freezing point: Undetermined. Initial boiling point and boiling range: Undetermined. · Flash point: Not applicable. · Flammability (solid, gas): Not determined. · Decomposition temperature: Not determined. · Auto-ignition temperature: Product is not selfigniting.
PAGE 5
46.1.13 Page 5/6 Safety data sheet according to 1907/2006/EC, Article 31 Printing date 10.04.2018 Version number 4 Revision: 10.04.2018 Trade name: Lötdraht HS10 Ecoloy TSC (Contd. of page 4) · STOT-repeated exposure Based on available data, the classification criteria are not met. · Aspiration hazard Based on available data, the classification criteria are not met. SECTION 12: Ecological information · 12.1 Toxicity · Aquatic toxicity: No further relevant information available. · 12.
PAGE 6
46.1.13 Page 6/6 Safety data sheet according to 1907/2006/EC, Article 31 Printing date 10.04.2018 Version number 4 Revision: 10.04.2018 Trade name: Lötdraht HS10 Ecoloy TSC (Contd. of page 5) SECTION 16: Other information This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. · Relevant phrases H317 May cause an allergic skin reaction.