User Manual

- 2 - - 15 -
Thank you for making Stanton your first choice in professional DJ
equipment.
This innovative instrument has been developed with input from the
professional DJ community, bringing to the marketplace a previously
unavailable, affordable combination of user-friendly, functional design,
rugged construction, and professional quality features.
Stanton and your authorized Stanton dealer are dedicated to your
complete satisfaction by offering benchmark service and support
throughout the long life of your Stanton product.
Again, we appreciate your patronage, and look forward to many years
of making music together.
Follow all security advice printed on the
unit.
• When removing the unit's AC plug from
he power source, grasp and pull the
plug, NEVER the cord itself!
Avoid placing the unit near heat
sources, such as power amplifiers.
• When in use, place the unit on a stable
surface, away from vibration. Always use
care when carrying the unit. Impact, or
heavy vibration may compromise the
unit's mechanical integrity. The manufac-
urer is not responsible for damage result-
ng from an impact, or misuse.
• When in use, place the unit away from
sources of hum or noise, such as trans-
ormers, or electric motors.
To prevent overheating, always provide
the unit with adequate ventilation air
space.
• Avoid stepping on the unit’s AC cord.
Repeated compression of the cord may
lead to electrical shorting.
• To avoid damage due to AC voltage
peaks, always disconnect your mixer from
the power source during electrical storms.
Use a surge protector if possible.
• The unit contains no user-serviceable
parts. The manufacturer is not responsi-
ble for any damage or personal injury
resulting from unauthorized user-servicing
or modifications. In addition, the warranty
will be void if any unauthorized service by
the user is detected. Always return the
unit to an authorized Stanton dealer for
servicing.
PL EASE READ CAREF UL LY BEFO RE USE
FAILURE TO FOLLOW THE INSTRUCTIONS PRINTED BELOW MAY VOID WARRANTY
T R A C K B A L L C L E A N I N G
CLEANING THE TRACKBALL
Remove the protective ring around the trackball by turning counter-clock-
wise until you feel it snap (about 1/10th of a turn). Remove the ring and
trackball. You can use cotton swab with alcohol or a soft tissue to rub off
the dust that has accumulated on the 2 rubber rings that pick up the
trackball movements. The rings are located on 2 metal bars at the bottom
and left side of the opening.,
To clean the trackball:
1. Turn ring counter-clockwise to remove.
2. Remove ring and trackball.
3. Clean mechanism with soft tissue or cotton
swab.
4. Re-assemble trackball and ring.