User Manual

- 12 - - 5 -
FUNCTIONS & FEAT U R E S
USER INTERFA C E
C O N N E C T I O N S
FUNCTIONS & FEAT U R E S
FX ON
The FX ON button is simply used to turn the effect on or off. Not the unit,
just the effect. This buttons also acts as a starting point (See Function
Keys).
MIX KNOB
The MIX knob controls the mix of the dry signal (original signal without
effects) and wet signal (processed signal with effects), giving the user the
option to hear either signal by itself. When the knob is turned all the way
to the left, only he dry signal will be heard (even if the effect is on). When
turned all the way to the right, only the processed signal will be heard.
When the knob is set to 12 o’clock (center, as shown) both signals are at
their maximum levels. When turned in either direction from the center,
one of the signals will decrease while the other will increase, giving you
the option to set the mix of both signals as you desire. For the Echo effect
for example, it is best to keep the mix set within the Dry area, giving just
enough wet signal to hear the Echo, but not enough so the Echo is loud-
er than the original signal (unless that is the desired effect). For effects
such as the Manual Filter or transformer, most of the time, you will want
to have only the wet signal.