C.
INTRODUCTION Congratulations and thank you for purchasing the latest addition to the growing Stanton family. Sporting a new attitude, and a fresh, modern look, the C.303 is a tabletop CD player with features and innovations giving club and mobile DJs a powerful, yet simple tool to mix, create, and perform their best.
10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. Polarization – This product may be equipped with a polarized alternation-current line plug (a plug having one blade wider than the other.) This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.
CONTROLS & FUNCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. SGL/CTN – Toggles between Single and Continuous play modes. Continuous mode operates like a normal CD player, playing the entire disc without stopping. Single mode only plays one track at a time, returning to the Cue point when the track is completed. The LCD will display “SINGLE” when in that mode. LCD DISPLAY – Shows various information on the status, modes, and functions of the unit.
13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. starting point of a seamless loop. Press OUT to set the ending point of a loop, and the loop will continue to play until the OUT button is pressed again. If a seamless loop has been made, but the CD player is not actively in loop mode (not playing), pressing the RELOOP button will instantly reactive the loop. Press OUT to exit the loop.
39. 40. 41. 42. ELAPSED / TOTAL / REMAIN – Indicates whether the time shown on the display refers to total remaining time or track remaining time. If either of these are not illuminated, this indicates elapsed track time. RELOOP – Indicates when there is a previously set loop, and that the loop is ready to be played again. LOOP – Indicates when the CD is in loop mode. SINGLE – Controlled by the SGL/CTN button, this indicates when the unit is set to play just one track at a time.
OPERATING INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. OPENING AND CLOSING This operation only works when the power is turned on. Press the OPEN/CLOSE button to open or close the disc tray, or press the PLAY button and the disc tray will close automatically. If the tray is not closed after 60 seconds it will close automatically and enter pause mode. The disc tray cannot be opened during playback. This prevents playback from being interrupted if the OPEN/CLOSE button is pressed accidentally.
15. 16. 17. 19. 23. Labeled 1 through 4, these banks store cue points, samples, or loops. Pressing one of the BANK buttons will store a cue point at the exact time it was pressed. The button will flash red, and then turn solid green, letting you know that a cue point has been stored. Press the button again, and playback will seamlessly restart from the stored cue point and the button will turn red. You can repeatedly press the BANK button to create a stuttering effect.
SPECIFICATIONS 1. APPLICATION Model C303 2. POWER SOURCE AC 120V, 60Hz, 12W 3. DIMENSIONS 318 (W)x 358 (D)x 92 (H) mm 4. WEIGHT 4.9 Kgs 5. FEATURES • Anti-shock playback • Instant start • Seamless loop • Pitch control • Key Lock • 4 banks sampler & cue memory • Auto cue 6. AUDIO CHARACTERISTICS (TEST DISC: TCD-782, LOAD=47Kohm) ITEM TYPICAL LIMIT CONDITION (1) Output level 1Vrms+/-0.5dB 1Vrms+/-1dB 1KHz,0dB (2) Channel balance within 0.5dB within1dB 1KHz,0dB (3) Frequency response 20-20KHz,+/-0.
8. PICK-UP System Object lens drive system Tracking detection Optical source Wave length Object lens drive system optical pick-up 2 dimensional paralleled drive 3 spot beam detection Semiconductor laser 780nm 9. GENERAL System Disc loading Display Pitch control range Pitch bend Pitch accuracy Compact Disc Digital Audio Front loading LCD Within +/-8%, +/-16%, +/-25%, +/-100% +/-100% 0.1% 10.ENVIRONMENTAL Operating Temperature Humidity Storage Temperature CONDITION 5 to 35 deg.