c314_manual.qxd 5/24/06 9:43 AM Page 1 C.
c314_manual.qxd 5/24/06 9:43 AM Page 2 IMPORTANT SAFETY INSTRUCTIONS 1. Read Instructions – All the safety and operating instructions should be read before this product is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3. Heed Warnings – All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions – All operating and use instructions should be followed. 5.
c314_manual.qxd 5/24/06 9:43 AM Page 3 WARRANTY & RETURN POLICY Warranty Through Stanton’s authorized dealers around the World, Stanton, or one of Stanton’s authorized distributors outside the U.S., will, without charge, repair or replace, at the sole discretion of the entity responsible for making the repair or providing the replacement, any Stanton merchandise proved defective in material or workmanship for a period of one (1) year following the date of original purchase.
c314_manual.qxd 5/24/06 9:43 AM Page 4 CONTROL OVERVIEW SPECIFICATIONS 1. APPLICATION Model C.314 2. POWER SOURCE US: 120V, 60Hz, AC 18W EU: 230V, 50Hz, AC 18W UK: 240V, 50Hz, AC 18W JPN: 100V, 50/60Hz, AC 18W ARG: 220V, 50Hz,AC 18W AUS: 240V, 50Hz,AC 18W 3. DIMENSIONS 318 (W)x 358 (D)x 109.5 (H) mm 4. WEIGHT 4.4Kgs 5. AUDIO CHARACTERISTICS (1) Frequency Response (2) Output Level (3) THD+N (4) S/N Ratio (ref: fullscale) 20Hz to 20kHz +0/-1.5 dB +6dBV <0.015% @ 1kHz 85dB 6.
c314_manual.qxd 5/24/06 9:43 AM Page 5 SAVING PRESETS AND CUE POINTS RELAY PLAY USING TWO PLAYERS This unit will retain the setting you have made for most of the functions even if you unplug it. These functions include Pitch Range, Pitch Lock, Key Lock, effects, Vinyl and Touch Rewind, Single/Continuous, Auto BPM, and Repeat. When both CD players are connected to each other via their FADER START / RELAY jacks, the players can work in unison by playing tracks one after another from both units.
c314_manual.qxd 5/24/06 9:43 AM Page 6 25. LOOP IN / OUT / RELOOP – These buttons control the marker points for seamless, on-the-fly looping. Press IN to set a cue point or the starting point of a seamless loop. Press OUT to set the ending point of a loop, and the loop will continue to play until the OUT button is pressed again. If a seamless loop has been made, but the CD player is not actively in loop mode (not playing), pressing the RELOOP button will instantly reactivate the loop.
c314_manual.qxd 5/24/06 9:43 AM Page 7 BEAT MATCHING USING EFFECTS Adjusting the Pitch With your first deck playing and your second deck cued, start playback in sync with the downbeat of the song playing on the other deck. Quickly adjust the pitch using the PITCH SLIDER to match the tempo of deck one. Moving the slider up (away from you) will decrease the tempo, while moving it down will increase the tempo.
c314_manual.qxd 5/24/06 9:43 AM Page 8 SET UP OPERATING INSTRUCTIONS Checking the contents UPDATING FIRMWARE Check that the carton contains all of the following items: • • • • • encoder to browse the list of tracks on the CD. While the track number is flashing, push down on the encoder to select the track. If it is an MP3 disc with folders, use the FOLDER encoder to browse folders as desired. The FOLDER button will light up when in Folder mode. Checking Firmware Version • Turn the unit off.
c314_manual.qxd 5/24/06 9:43 AM Page 8 SET UP OPERATING INSTRUCTIONS Checking the contents UPDATING FIRMWARE Check that the carton contains all of the following items: • • • • • encoder to browse the list of tracks on the CD. While the track number is flashing, push down on the encoder to select the track. If it is an MP3 disc with folders, use the FOLDER encoder to browse folders as desired. The FOLDER button will light up when in Folder mode. Checking Firmware Version • Turn the unit off.
c314_manual.qxd 5/24/06 9:43 AM Page 7 BEAT MATCHING USING EFFECTS Adjusting the Pitch With your first deck playing and your second deck cued, start playback in sync with the downbeat of the song playing on the other deck. Quickly adjust the pitch using the PITCH SLIDER to match the tempo of deck one. Moving the slider up (away from you) will decrease the tempo, while moving it down will increase the tempo.
c314_manual.qxd 5/24/06 9:43 AM Page 6 25. LOOP IN / OUT / RELOOP – These buttons control the marker points for seamless, on-the-fly looping. Press IN to set a cue point or the starting point of a seamless loop. Press OUT to set the ending point of a loop, and the loop will continue to play until the OUT button is pressed again. If a seamless loop has been made, but the CD player is not actively in loop mode (not playing), pressing the RELOOP button will instantly reactivate the loop.
c314_manual.qxd 5/24/06 9:43 AM Page 5 SAVING PRESETS AND CUE POINTS RELAY PLAY USING TWO PLAYERS This unit will retain the setting you have made for most of the functions even if you unplug it. These functions include Pitch Range, Pitch Lock, Key Lock, effects, Vinyl and Touch Rewind, Single/Continuous, Auto BPM, and Repeat. When both CD players are connected to each other via their FADER START / RELAY jacks, the players can work in unison by playing tracks one after another from both units.
c314_manual.qxd 5/24/06 9:43 AM Page 4 CONTROL OVERVIEW SPECIFICATIONS 1. APPLICATION Model C.314 2. POWER SOURCE US: 120V, 60Hz, AC 18W EU: 230V, 50Hz, AC 18W UK: 240V, 50Hz, AC 18W JPN: 100V, 50/60Hz, AC 18W ARG: 220V, 50Hz,AC 18W AUS: 240V, 50Hz,AC 18W 3. DIMENSIONS 318 (W)x 358 (D)x 109.5 (H) mm 4. WEIGHT 4.4Kgs 5. AUDIO CHARACTERISTICS (1) Frequency Response (2) Output Level (3) THD+N (4) S/N Ratio (ref: fullscale) 20Hz to 20kHz +0/-1.5 dB +6dBV <0.015% @ 1kHz 85dB 6.
c314_manual.qxd 5/24/06 9:43 AM Page 3 WARRANTY & RETURN POLICY Warranty Through Stanton’s authorized dealers around the World, Stanton, or one of Stanton’s authorized distributors outside the U.S., will, without charge, repair or replace, at the sole discretion of the entity responsible for making the repair or providing the replacement, any Stanton merchandise proved defective in material or workmanship for a period of one (1) year following the date of original purchase.
