CD Player Users Manual C

Once Delay, Filter, or Flange has been selected it is easier to enjoy FX with AUTO SYNCH on. More
advanced users adjust the effect level or parameter manually; Press & hold SHIFT button + effect
name (DELAY, FILTER, or FLANGE) to shift / toggle between the effect’s parameter & effect level
(wet/dry), then use the Jog wheel to adjust.
24. KEY SHIFT Button
Turns the KEY SHIFT function on and off. When KEY SHIFT function is turned on, this button will
light blue. Pressing and holding this button then using the Jog wheel selects the Key Shift value.
When Key Shift value is set to other than 0% internally, KEY indicator in the LCD will light.
NOTE:
When KEY LOCK function is activated, KEY SHIFT function cannot be turned on.
NOTE:
Turning off KEY SHIFT does not return KEY to original value. This must be done manually by re-
adjusting KEY SHIFT to its original value (via Jog Wheel / Pitch Bend)
25. Jog wheel
The following functions can be controlled by using the Jog wheel:
* Pitch Bend
* VINYL / Scratch
* Brake time
* KEY SHIFT control
* Preset menus [SHIFT + Jog Wheel]
* Effect parameters
* Program edit
* Track memory number select
* Search (in Paused mode)
26. MEMORY/CUE [MEMO/INS] Button
Activates the three buttons below (1/IN, 2/OUT, and 3/RELOOP) ready for CUE mode. When these
three buttons are set to CUE mode, this button will light green, press again to SET cue for bank 1,
2, or 3. Pressing and holding the SHIFT then pressing MEMORY/CUE enters the track memory store
mode [MEMO/INS].
NOTE:
Memory store mode allows the user to store track memory in several banks (A – E). For more infor-
mation on memory store mode see section 3-4 Track Memory.
When unit is in program edit mode, pressing this button inserts a program track.
For more information on the insert function see section 3-8 Program Play.
27. SAMPLE [o—/o-o] Button
Activates the three buttons below (1/IN, 2/OUT, and 3/RELOOP) ready for SAMPLE mode. When
these three buttons are set to SAMPLE mode, this button and “SAMPLE” indicator in the LCD will
light. When sampler is playing, pressing this button stops the sample (and the button is not lit).
NOTE: