PROFESSIONAL CD PLAYER TIME PITCH RANGE RATIO BPM IN 1 4 BANK PGM 1 2 3 4 1 1 2 1 TAP 4 1 OUT FX SEL.
Important To Safety WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: 1. Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. When removing from wall outlet, be sure to remove by holding the plug attachment and not by pulling the cord. NOTE: This CD player uses the semiconductor laser.
Important Safety Instructions 1. Read Instructions – All the safety and operating instructions should be read before this product is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5.
Features Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ 10 seconds of anti-shock memory Instant start Seamless loop Pitch range: +/-100% +/-0.1% Scratch play Reverse play Auto/manual BPM Echo effect (Echo time 0ms~2000ms +/-1ms) Filter effect (Span time 0ms +/-1ms~500ms +/-5ms~1000ms +/-10ms~9990ms) Break effect (Span time 0ms +/-1ms~500ms +/-5ms~1000ms +/-10ms~9990ms) Flanger effect (Flanger time 10ms +/-1ms~1000ms +/-10ms~9990ms).
1. DISPLAY PANEL ─ LCD-display for displaying the different modes and functions. 2. PARAMETER TIME-CONTROL - With the Parameter Time-Control, you can adjust the effect time. 3. PARAMETER RATIO-CONTROL - With the Parameter-Ratio-Control, you can adjust the effect ratio. 4. SEARCH WHEEL - This wheel has 4 forward and 4 reverse speed positions allowing you to quickly scan through tracks. The more you turn the wheel in either direction the faster you search. 5.
decrease or increase when button is pressing and returns to the original pitch when the button is released. 25. BEAT SYNC-BUTTONS - Via the BEAT SYNC buttons you can adjust the tempo(time) of the FX. There are 6 Beat-Sync Parameter sets: 1/4,1/2,3/4,1/1,2/1 and 4/1. 26. JOG WHEEL - This wheel has three functions: 1. The jog wheel will act as a frame search control when the CD in the pause or cue mode, allowing you to set a point. 2. The wheel also works as a pitch bend during playback.
AUDIO OUT 35 35 DIGITAL OUT 36 RELAY 37 35. AUDIO OUT-SOCKETS - This analogue signal requires RCA (left & right) connections. Connect this output to the respective input of your mixer (Line/Aux). 36. DIGITAL OUT-SOCKET - This digital signal requires one SP/DIF (75 Ohm) connection. Connect this output to the respective input of your mixer / computer. 37. RELAY SOCKET - Via the RELAY SOCKET, two CD players can be linked (connected) for relay play.
Set-up 1.Checking the Contents Check that the carton contains the following items: 1. 2. 3. 4. Tabletop unit Operating instructions One RCA cable. One AC power cord. 2. Installing the Unit 1. Place your unit on a flat leveled surface. 2. Be sure the player is in a well-ventilated area where it will not be exposed to direct sunlight, high temperatures, or high humidity. 3. Try to place the unit as far as possible from TVs and tuners, as the unit may cause undesirable interference.
Operating instructions 1.Opening and Closing This operation only works when the power is on. Press the OPEN/CLOSE button to open or close the disc tray, or press PLAY button, the disc tray automatically closes. If tray is not closed after 60 seconds it will close automatically and pause. The disc tray cannot be opened during playback to prevent playback from being interrupted if the OPEN/CLOSE button is pressed accidentally. Stop playback, then press the OPEN/CLOSE button. 2.
Operating instructions 12.Seamless Loop Play (Cont.) a- (Must be in SEAMLESS LOOP mode). If a SEAMLESS LOOP has not been created, follow instructions on this page for creating a SEAMLESS LOOP. If a SEAMLESS LOOP has already been created, press RELOOP BUTTON to reenter the SEMALESS LOOP mode. b- Next, press OUT/EXIT BUTTON to return to normal play (figure 6). This disengages the SEAMLESS LOOP mode. SEAMLESS LOOP IN OUT Fig.
turned off at this point, the loop will continue in regular play. If the OUT/EXIT button is pressed during reverse loop playback mode, playback will continue in reverse until the reverse function. 22.Pitch Bend Hold To lock the pitch bend at a specific parameter press the HOLD button. This will engage the hold function which will lock your desired pitch bend parameter and set a new default value. Then you turn the wheel clockwise to increase the pitch or counterclockwise to decrease the pitch permanently.
Specifications 1. APPLICATION Model S-450 2. POWER SOURCE AC 230V, 50Hz, 15W 3. DIMENSIONS 348 (W)x 246 (D)x 106 (H) mm 4 WEIGHT 3.2 Kgs 5. CHARACTERISTICS (TEST DISC: TCD-782, LOAD=47Kohm) ITEM TYPICAL LIMIT (1) Output level 1Vrms+/-0.5dB 1Vrms+/-1dB (2) Channel balance within 0.5dB within1dB (3) Frequency response 20-20KHz,+/-0.5dB 20-20KHz,+/-1dB (4) De-emphasis response +/-2.5dB +/-3dB (5) Channel separation 83dB 75dB (6) T.H.D. + NOISE*1 0.01% 0.