SK 6F P R O F E S S I O N A L M I X E R OWNER’S M A N U A L © 2001, Stanton Magnetics, LLC STANTON MAGNETICS, LLC info@stantonmagnetics.com • (954) 929-8999 w w w . s t a n t o n m a g n e t i c s .
TROUBLESHOOTING Thank you for making Stanton your first choice in professional DJ mixers. This innovative family of mixers has been developed with input from the professional DJ community, bringing to the marketplace a previously unavailable, affordable combination of user-friendly, functional design, rugged construction, and professional quality features. PROBLEM CAUSE Excessive hum when using phono source. Poor ground connection. Properly connect turntable ground wire to mixer ground terminal.
DESCRIPTION OF FUNCTIONS 1. Mic level: Controls the overall microphone output level. 2. Send: Controls the level of the effect send output. this is used to set the level of the signal going to the outboard effects processor or stomp box. 3. Return: Controls the level of the effect return input. This is used to control the level of the processed signal going back into the mixer 4. FX: Effect ON/OFF for each channel, MIC, and cue. 5. Gain: Controls the input level of each channel. 6.
FADER CLEANING T E C H N I C A L S P E C I F I C AT I O N S The SK FOUR faders may need lubrication from time to time. This will extend the fader life and eliminate any potential damage due to extended heavy usage. Follow the instruction below the lubricate your faders: Line inputs: Phono inputs: Send: Return: DJ mic input: Master output: 1. Remove the 3 fader knobs and 4 screws located in the corners of the face plate and take the plate off the mixer. 2 .
