ASSEMBLY Remove all the parts from the box. Please check to make sure the following items are included with the main unit in the carton: (1) (2) (3) (4) (5) (6) (7) (8) (9) Operating instructions Platter Slip mat Counterweight 45-rpm adapter Headshell AC cord Connecting cord Cartridge CONNECTIONS 1. Connect the power cord to the auxiliary power outlet on the rear panel of your amplifier or receiver or to a household AC outlet. 2.
PART NAMES & FUNCTIONS 10) PITCH SLIDER Use this to change the speed of the platter when the PITCH button is lit. 11) HEADSHELL LOCKING NUT Attach the headshell by inserting into the front end of the tone arm, then turn the locking nut clockwise with the head shell firmly held horizontally. 12) TONE ARM This is a fully manual tone arm. To start playback, gently place the stylus on the record using the headshell finger support.
SCRATCH PROTECTION The STR8-90 includes a pair of rubber protectors. These were designed to protect the turntable’s rounded aluminum edges from the mixer while scratching. When the turntables are placed sideways, the round edges of the turntable may come in contact with the mixer’s rack ears causing damage to the turntable body. Placing the rubber protectors on the mixer rack ears (see picture) will prevent the turntable from getting scratched.