Use and Care Manual

Star brite Waterproofing with PTEF restores water repellency to virtually all marine
fabrics from boat covers to bimini tops. It is also the easiest, most effective way to
waterproof car covers, tents, tarps, foul weather gear, convertible tops and more.
Star brite Waterproofing is also great for use on new fabrics, greatly extending their
service life by providing an additional barrier to moisture and damaging UV rays.
It’s easy to use; simply spray the fabric to be restored, and allow it to dry for 6 hours
before use. Always apply Waterproofing outdoors, taking care to not breathe the
solution.
Waterproofing is safe for on all marine fabrics, including Sunbrella.
•1 Gallon - 465 square Feet of coverage*
•22 oz covers – 80 square feet coverage*
* Coverage may vary slightly depending upon amount of product applied per square
foot
Features
•For boat covers, bimini tops, sail covers, clothing and tents.
•Does not change the color or feel of fabric.
Directions
If surface to be waterproofed is dirty or stained, clean it with Star brite® Sail &
Canvas Cleaner. Fabric to be treated must be dry. Apply enough Waterproofing with
sprayer, brush or sponge to thoroughly wet top surface. Take care to avoid
overspray, drips or penetration onto surfaces not being treated. Allow treated item
to dry for 6 hours before using. Do not fold or store treated item until dry. Use only
in a well ventilated area.
STAR BRITE WATERPROOFING CARE & USE