MSDS

ManualsBrandsStar Brite ManualsCleaningPerformacide 32 oz. Professional Grade Mold and Mildew Stain Blocker

MATERIAL SAFETY DATA SHEET

Prepared to U.S. OSHA, CMA, ANSI and Canadian WHMIS Standards

PART I What is the material and what do I need to know in an emergency?

1. PRODUCT IDENTIFICATION

TRADE NAME (AS LABELED): Mildew Stain Blocker w/ Nano Tech Barrier

PRODUCT #: 86622

PRODUCT USE: Protector

MANUFACTURER'S NAME: STAR BRITE

ADDRESS: 4041 S. W. 47 Avenue

Ft. Lauderdale, FL 33314

EMERGENCY PHONE: Chemtrec

(800) 424-9300 or 703-527-3887

BUSINESS PHONE: (954) 587-6280

DATE OF PREPARATION: July 12, 2010

2. COMPOSITION and INFORMATION ON INGREDIENTS

CHEMICAL NAME

CAS #

% w/w

EXPOSURE LIMITS IN AIR

ACGIH

OSHA

NIOSH

OTHER

TLV

STEL

PEL

STEL

IDLH

ppm

1-Octadeacanminium, N,N-

dimethyl-N-[3-

(trimethoxysilyl)propyl]-,chloride

(1:1)

27668-52-6 10-20% NE NE NE NE NE

Water, and other components. Each of the

buffering agents and other components are

present in less than 1% concentration (or 0.1%

concentration for carcinogen

s, reproductive

toxins, or respiratory sensitizer)

Balance The remaining components of this product do not contribute any significant additional

hazards. All pertinent hazard information has been provided in this document, per

the requirements of the Federal Occupational Safety and Health Administration

Standard (29 CFR 1910.1200), U.S. State equivalent Standards, and Canadian

Workplace Hazardous Materials Identification System Standards (CPR 4).

NE = Not Established. See Section 14 for Definitions of Terms Used.

NOTE: ALL WHMIS required information is included in appropriate sections based on the ANSI Z400.1-1998 format. This product has been classified in

accordance with the hazard criteria of the CPR and the MSDS contains all the information required by the CPR.

3. HAZARD IDENTIFICATION

EMERGENCY OVERVIEW: This is a clear, to slightly hazy liquid with a pleasant odor. The main health hazard associated

with exposure to this product is the potential for moderate irritation of skin and other contaminated tissue. This solution is

not flammable or reactive. If involved in a fire, products of thermal decomposition from this product may include oxides of

carbon. Emergency responders must wear the personal protective equipment suitable for the situation

to which they are

responding.

SYMPTOMS OF OVEREXPOSURE BY ROUTE OF EXPOSURE: The most significant routes of occupational overexposure

are inhalation and contact with skin and eyes. The symptoms of overexposure to this product are as follows:

INHALATION: Inhalation of great amounts of product vapors, mists, or sprays of this product may be irritating to the

respiratory system.

Mildew Stain Blocker w/Nano Tech Barrier MSDS

PAGE 1 OF 7

Summary of content (7 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET Prepared to U.S. OSHA, CMA, ANSI and Canadian WHMIS Standards PART I What is the material and what do I need to know in an emergency? 1. PRODUCT IDENTIFICATION TRADE NAME (AS LABELED): Mildew Stain Blocker w/ Nano Tech Barrier PRODUCT #: 86622 PRODUCT USE: MANUFACTURER'S NAME: ADDRESS: Protector STAR BRITE 4041 S. W. 47 Avenue Ft.
PAGE 2
3. HAZARD IDENTIFICATION (Continued) CONTACT WITH SKIN or EYES: This product may be mildly irritating to contaminated skin when contact is short-lived. Prolonged skin contact may be moderately irritating and may result in dermatitis (dry, red, itchy skin). Contact with the eyes may cause moderate to irritation and symptoms of pain, redness, and watering. Prolonged eye contact may result in lacrymation and excessive tearing. SKIN ABSORPTION: No toxic effect is expected.
PAGE 3
5. FIRE-FIGHTING MEASURES FLASH POINT: >200F (setaflash) AUTOIGNITION TEMPERATURE: Not applicable. FLAMMABLE LIMITS (in air by volume, %): Lower (LEL): Not applicable. Upper (UEL): Not applicable. NFPA RATING FLAMMABILITY 0 FIRE EXTINGUISHING MATERIALS: Water Spray: NO Carbon Dioxide: YES HEALTH REACTIVITY 1 0 Foam: YES Dry Chemical: YES Halon: YES Other: Any "ABC" Class. UNUSUAL FIRE AND EXPLOSION HAZARDS: WATER MAY NOT BE EFFECTIVE. Explosion Sensitivity to Mechanical Impact: Not sensitive.
PAGE 4
8. EXPOSURE CONTROLS - PERSONAL PROTECTION VENTILATION AND ENGINEERING CONTROLS: Use with adequate ventilation to ensure exposure levels are maintained below the limits provided in Section 2 (Composition and Information on Ingredients), if applicable. Ensure eyewash/safety shower stations are available near areas where this product is used. RESPIRATORY PROTECTION: None needed under normal circumstances of use.
PAGE 5
PART IV Is there any other useful information about this material? 11. DISPOSAL CONSIDERATIONS PREPARING WASTES FOR DISPOSAL: Waste disposal must be in accordance with appropriate Federal, State, and local regulations. This product, if unaltered by use, may be disposed of by treatment at a permitted facility or as advised by your local hazardous waste regulatory authority. EPA WASTE NUMBER: Not applicable. 12.
PAGE 6
14. OTHER INFORMATION PREPARED BY: Starbrite Distribution 4041 SW 47th Av Fort Lauderdale, Fl 33314 (800) 327-8583 DATE OF PRINTING: December 2, 2014 The information contained herein is based on data considered accurate. However, no warranty is expressed or implied regarding the accuracy of these data or the results to be obtained from the use thereof.
PAGE 7
DEFINITIONS OF TERMS A large number of abbreviations and acronyms appear on a MSDS. Some of these which are commonly used include the following: CAS #: This is the Chemical Abstract Service Number which uniquely identifies each constituent. EXPOSURE LIMITS IN AIR: ACGIH - American Conference of Governmental Industrial Hygienists, a professional association which establishes exposure limits.