User's Manual

put the battery near necklaces or other metal objects, as this will cause the battery to leak,
overheat, crack and catch fire.
Please do not solder the contact points of the battery, as this will cause the battery to leak,
overheat, crack and catch fire.
If the liquid in the batteries goes into the eyes, there is a risk of blindness. If this occurs do not
rub the eyes, but immediately rinse eyes with clear water and go to the hospital for treatment.
Please do not disassemble or modify the battery, as this will cause the battery to leak, overheat,
crack and catch fire.
Please do not use or place the batteries near high temperature places such as near a fire or
heating vessel, as this will cause the battery to leak, overheat, crack and catch fire.
If the battery overheats, changes color, or becomes distorted during use, charging, or storage,
please stop using and replace it with a new battery.
If the liquid from the battery comes in contact with skin or clothing this could cause burning of
the skin. Immediately use clear water to rinse and seek medical tips if necessary.
If the battery leaks or gives off a strange odor, please remove the battery from the vicinity of the
open fire to avoid a fire or explosion.
Please do no let the battery become wet as this will cause the battery to overheat, smoke and
corrode.
Please do not use or place batteries in places of high temperature such as in direct sunlight, as
this will cause the battery to leak and overheat, lower performance, and shorten the battery’s
life.
Please do not continuously charge for more than 24 hours.
1.3.4 Charging your phone
Connect the connector of charger to the mobile phone. The battery level indicator flashes on the
screen. Even if the phone has been turned off, the charging image still appears, indicating that
the battery is being charged. If the phone is overused when the current is insufficient, it may take
longer time for the charging indicator to appear on the screen after the charging begins.
When the battery level indicator does not flash and indicates the battery is full, this indicates the
charging has been completed. If the phone is off during charging, the charging being completed
image also appears on the screen. The charging process often takes 3 to 4 hours. During the
charging, the battery, phone and charger gets warm, this is a normal phenomenon.
Upon the completion of charging, disconnect the charger from AC power socket, and from the
mobile phone.
Notes:
During charging, the phone must be placed in well-ventilated environment.
Always use the charger supplied by your phone manufacturer. Using an unauthorized charger
might cause danger and invalidate the authorization and warranty clauses for your phone.
The standby time and call duration provided by the manufacturer are based on ideal operating
environment. In practice, the battery's operating time varies depending on network conditions,
operating environment and usage methods.
Make sure the battery has been installed before charging. It is best not to remove the battery
while charging.
Upon completion of charging, disconnect the charger from your phone and the power supply.