User's Manual

User Guide 27
4.1.1 Copy les to memory cards.
1. Use a USB cable to connect MID with computer.
2. After setting the store setting, connect MID with computer
successfully.
3. Open My Computer of your computer, “portable disk (x)” can be
seen.
4. Select the intended les and copy to the “portable disk (x)”.
5. After copying the les, click “safe deletion hardware”
icon of
your computer task bar to unload.
4.1.2 Content of MID Storage Device
1. NAND FLASH storage device, MID itself has 4G storage space
for keeping les.
2. TF removable storage card.
3. The above mentioned two storage devices can connect your
computer by using USB.
Note: When you connect the USB cable with MID, enabling the USB
storage device, you will not get access to Internal Memory; If you
want to get access to Internal Memory, please disconnect the USB
device.
4.1.3 Storage card
Copy les to storage card
You can transfer les between MID and computer such as music
and pictures, etc. If you want to check the les, please click the le