User's Manual

29
on the 3G network card, which indicated that it could begin to connect the 3G
network.
Tap Settings → 3G network, And tap “Add 3G network”, in the popup dialog
box, Fill the name, Device number, APN, user and password information.
Name: In the popup dialog box, Name field enter the name you want free you
can.
Device number and APN: Please fill in the information provided by carriers.
(As in China: If you use China Unicom and China Mobile's 3G network card,
device number field need to fill in "*99#", APN need to fill in the "cmnet"; if
China Telecom formats 3G on the card, phone number need to fill in the
column "T#777", APN do not need to fill in the name of column.)
User and Password: If you use the standard of China Unicom and China
Mobile's 3G network card, user and password fields are free to fill or not fill; if
you use the standard of China Telecom's 3G network card, user and
password fields need to fill in( user: card, password: card).
Note: If enter the above user and password does not work properly. Please
make try to fill in (user: ctnet@mycdma, password: vnet.mobi) or (user: ctnet,
password: vnet.mobi), also you can request to China Telecom.
Fill then click the link, and you will see the bottom of status bar 3G symbol
appears, indicating the completion of 3G is connected, and then you can get
online.
30 GPS
GPS functionality requires the use of a USB interface external GPS receiver.
(It access to device via the USB host transfer cable). Users need to download
the navigation software and map from the internet, through the SD card
installation (please refer to the Application Management section of this User
Guide). The currently supported on the GPS receiver type please refer to
Appendix.
31 PPPoE SETTINGS
Before using this feature, connect the USB network card via the USB host
transfer cable access to device.
1. Tap Settings → PPPoE settings .
2. Input name and password then click connect to access the broadband
network.
32 ETHERNET
Before using this feature, connect the USB network card via the USB host
transfer cable access to device. When the USB network cable is plugged into