Owner's manual

-8-
Flash Patterns
Flash
Pattern #
Pattern Description CPS** Shortcut
1 Alternating Flicker 1.0
† 3Sec
2 Alternating Fast Double Flash 3.3
3 Alternating Triple Flash 2.5
4 Alternating PSU Flicker 0.7
5 Alternating PSU Random 0.6
6 Alternating Quad Flash 1.0
†† 6Sec
7 Alternating Quad Flash w/Post-Pop 1.0
8 Alternating Single Flash 1.0
9 Alternating Slow Double Flash 1.0
10 Alternating Variable 0.3
11
Alternating Post Pop (Amber Value versions)
Alternating Quintflash (All others)
1.2
††† 9Sec
(FOR NON-AMBER VERSIONS)
12
Alternating Random (Amber Value versions)
Swing (All others)
1.3
13
Alternating Quintflash (Amber Value versions)
Alternating Fast Doubleflash, Alternating Flicker (All others)
N/A
††† 9Sec
(FOR AMBER VERSIONS)
14
Alternating Fast Doubleflash, Alternating Flicker (Amber Value versions)
Alt. Quad, Alt. Flicker, Alt. Double, Flicker (All others)
N/A
15
Alt. Quad, Alt. Flicker, Alt. Double, Flicker (Amber Value versions)
Counter Clockwise Rotation (All others)
2.5
16 Simultaneous Quad w/Post Pop (Phase 1) 1.0
†††† 12Sec
17 Simultaneous Quad w/Post Pop (Phase 2) 1.0
18 Alt. Triple, Alt. Non-Synch Double, Alt. Quint, Flicker N/A
19 Steady burn one side, Other side Single Flash 1.0
20 Cycle All N/A
21 ☼ Quad w/Post Pop, Fast Double w/Post Pop ☼
N/A
22 ☼ Alternating Non-Synch Double ☼
3.4
23 ☼ Swing, Flicker ☼
N/A
24 ☼ Slow Double, Fast Double ☼
N/A
25 ☼ Alternating Fade ☼
0.8
26 ☼ Simultaneous Flicker (Phase 1) ☼
1.0
††††† 15Sec
27 ☼ Simultaneous Flicker (Phase 2) ☼
1.0
28 ☼ Simultaneous Tripleflash (Phase 1 ☼)
2.5
29 ☼ Simultaneous Tripleflash (Phase 2) ☼
2.5
30 ☼ Simultaneous Doubleflash (Phase 1) ☼
1.0
31 ☼ Simultaneous Doubleflash (Phase 2) ☼
1.0
32 ☼ Simultaneous Quadflash (Phase 1) ☼
1.0
33 ☼ Simultaneous Quadflash (Phase 2) ☼
1.0
34 ☼
Sim. Quad (Phase 1), Alt. Triple,
Sim. Flicker (Phase 1), Alt. Fast Double ☼
N/A
35 ☼
Sim. Quad (Phase 2), Alt. Triple,
Sim. Flicker (Phase 2), Alt. Fast Double ☼
N/A
†, ††, †††, ††††, ††††† = Programming Shortcuts 1, 2, 3, 4, and 5 (see table on previous page)
* = Used for Synchronization
** = Cycles Per Second
The S8070-346-2**circuit, used in these lightbars, has low input voltage detection. With this feature the
lightbar senses the input voltage and flashes a fast pattern (approximately 16 cycles per second) to indicate
to the user that the battery voltage in getting low (less than 10V). Once the input voltage returns to normal
(greater than 12V) the unit will return to the normal flashing.
☼ Patterns 21-35 are NOT included in the Amber Value versions