Manual

PLITSTR43 REV. N 2/3/10

INSTALLATION INSTRUCTIONS

20, 200, 240, 241, 400B, & 450B SERIES

241SF SERIES

241S SERIES

200S

SERIES

20ZI & 200Z

SERIES

21ZI & 201Z

SERIES

450BH SERIES

400B SERIES 200B SERIES

20FI, 20RH, 20RI, 200J,

& 200U SERIES

240S SERIES

240C and, 240A

SERIES

240CF and 240AF

SERIES

240SF/240ZF SERIES

PAGE 1
INSTALLATION INSTRUCTIONS 20, 200, 240, 241, 400B, & 450B SERIES 20ZI & 200Z SERIES 21ZI & 201Z SERIES 200S SERIES 20FI, 20RH, 20RI, 200J, & 200U SERIES 241S SERIES 240S SERIES 240C and, 240A SERIES 241SF SERIES 240SF/240ZF SERIES 240CF and 240AF SERIES 400B SERIES 200B SERIES 450BH SERIES PLITSTR43 REV.
PAGE 2
PERMANENT MOUNT INSTALLATION INSTRUCTIONS IMPORTANT: Please read all of the following instructions before installing your new light. 1. CAUTION: All of our DC powered warning lights are polarity sensitive. These lights are polarity protected only if the appropriate fuse is used. All wires connected to the positive terminal of the battery should be fused at the battery for their rated load. Testing the light before this fuse is properly installed will void the warranty on the light. 2.
PAGE 3
SP3860-2H SWITCH PANEL (REAR VIEW) ON 3 3 2 2 1 1 LOW OFF SW2 SW1 BLACK A t w o-switch switch-panel is required to utilize the High/Low power option. Make your connections as illustrated above.
PAGE 4
Magnet Mount Lights WARNING!!!! Care should be taken when positioning any warning light on the roof, dash, or instrument panel of the vehicle, so that the light and/or cord does not interfere with the proper operation of any airbags! Failure to heed this warning may result in serious or fatal injury.