Owner's manual

PARTS LIST
Circuit (Red/Blue) S8070-228-1 Cig Plug 176
Circuit (Red/Red) S8070-228-2 Clear Lens P30129-10C
Circuit (Blue/Blue) S8070-228-3 Velcro Straps P30209-1
Circuit (Amber/Amber) S8070-228-4 Backplate P30019-59
Circuit (Red/Amber) S8070-228-5 Backplate Screws P30052-32
Circuit (Blue/Amber) S8070-228-6 Switchbutton Nuts P30007-68-1
Circuit (White/White) S8070-228-7 Front Housing/Frame P30214-2
This light has been factory tested and approved. If the light fails to work when the plug is
inserted into the cigarette plug, check the green LED on the side of the light.
If the green LED is not lit:
A. Press the red ON/OFF push-button switch
B. Twist the plug a few times to remove any ash or other deposits which might be
preventing a good contact from being made
C. Remove the fuse from the vehicle fuse box and check to see if it has blown.
D. Remove the fuse from the cig plug on the light (if present) and check to see if it has
blown.
E. Clean the lighter socket and contact surfaces.
If your VL22 does not flash and the green LED is lit:
A. Press the black Pattern Select push-button switch to be sure the “Off” pattern is not
selected.
B. Check that the light is properly oriented with the cig plug exiting from the top of the
light and that the light is in a vertical position.
ONE YEAR LIMITED WARRANTY
The manufacturer warrants each new product against factory defects in material and workmanship for one year after the
date of purchase. The owner will be responsible for returning to the Service Center any defective item(s) with the
transportation costs prepaid. The manufacturer will, without charge, repair or replace at its option, lights or light part(s)
which its inspection determines to be defective. Repair or replacement item(s) will be returned to the purchaser with
transportation costs prepaid from the service point. A copy of the purchaser's receipt must be returned with the defective
item(s) in order to qualify for the warranty coverage. Exclusions from this warranty are FLASH TUBES/BULB(S)as well
as the finish. This warranty shall not apply to any light which has been altered, such that in the manufacturer's judgment
the performance or reliability has been affected or damage has resulted from abnormal use or service.
There are no warranties expressed or implied (including any warranty of merchantability or fitness), which extend this
warranty period. The loss of use of the product, loss of time, inconvenience, commercial loss or consequential
damages, including costs of any labor, are not covered. The manufacturer reserves the right to change the design of the
product without assuming any obligation to modify any product previously manufactured.
This warranty gives you specific legal rights. You might also have additional rights which may vary from state to state.
Some states do not allow limitations on how long an implied warranty lasts. Some states do not allow the exclusion or
limitation of incidental or consequential damages. Therefore, the above limitation(s) or exclusion(s) may not apply to you.
If you have any questions concerning this or any other product,
please contact our Customer Service Department at [phone].
If a product must be returned for any reason, please contact our Customer Service Department
to obtain a Returned Goods Authorization number (RGA #) before you ship the product to Star.
Please write the RGA # clearly on the package near the mailing label.
The VL22 uses state-of-the-art Light Emitting Diode (LED) technology. This warning
light is comprised of ultra-high intensity LEDs that are operated by a micro-controller
to efficiently produce light output with lifetimes up to 100,000 hours. Under normal
circumstances, you will not need to replace any lights in this warning light.