HJ580SA/ HJ580SA-S Wireless Speaker System for your iPod® Operation Manual ©2009 Hamilton Beach Brands, Inc. Hamilton Beach® is a trademark of Hamilton Beach Brands, Inc. used uder license by Starlite Consumer Electronics (USA) Inc. IPB125 HJ580SA eng 09.
RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
CONTROLS AND INDICATORS BASE UNIT • iPod® docking • Speaker Set Battery charger • RF signal transmitter 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. RF Antenna Battery Charge Contacts iPod® Dock VOL – Button Standby / On Button VOL + Button Remote Sensor AUX LED Indicator iPod® LED Indicator Audio Out Jack AUX In Jack DC In 9V Jack VOL VOL SPEAKER SET • With built-in rechargeable battery 1. 2. 3. 4. 5.
REMOTE CONTROL HANDSET 1. IR Transmitter 2. Standby / On Button - ON and OFF the system 3. Function Button - Selects source input, iPod® and AUX IN 4. Skip Button - Skip or fast backward while iPod® is playing 5. Volume + Button - Increases volume level 6. Volume – Button - Decreases volume level 7. Play/Pause Button - Play and Pause iPod® play 8. Skip Button - Skip or fast forward while iPod® is playing 1 2 3 7 4 8 5 6 REMOTE CONTROL BATTERY INSTALLATION 1. Slide the battery compartment out. 2.
iPod® Inserts Your system comes with removable inserts to fit your iPod® properly while docked. Each insert carries a number to match your iPod®. Please locate the correct one according to the summary below. Refer to iPod® MODE OPERATION chapter to operate and charge the iPod® player (except iPod® shuffle). iPod® Type Memory Holder No.
iPod® nano (4th generation) 8GB &16GB NANO (4GEN) holder iPod® touch 8GB & 16GB TOUCH (1GEN) holder iPod® touch 8GB & 16GB & (2nd generation) 32GB TOUCH (2GEN) holder iPod® classic 8GB & 120GB VIDEO 30GB, CLASSIC 80/120GB iPod® classic 160GB VIDEO 60/80GB, CLASSIC 160GB NOTE: • The 10 inserts provided with this unit are for use with this unit : they are not Universal Docks. IMPORTANT! The identification no. is engraved at the bottom of the inserts.
OPERATION - Press the “STANDBY” button of Base Unit or Remote Control Handset once to turn on the system. LED indicator of “iPod®” or “AUX” from Base Unit will light up. Set the ON/OFF switch of Speaker Set to ON position. LED indicator will light up. INSTALLATION - Place the Speaker Set to the Base Unit firmly with proper position. - Connect the DC plug of AC/DC adapter to the “DC IN 9V” jack of Base Unit.
iPod® MODE OPERATION 1. Please make sure to use the correct insert for your iPod® and be sure it is properly docked into the system; failure to do so may damage your iPod®. 2. iPhone and iPod® shuffle models are not supported. CHARGING THE iPod® While the iPod® is docked and the system is properly connected to AC power, the iPod® begins charging automatically. Remarks: 3rd generation iPod® will not be charged. LISTEN TO iPod® 1. Gently press the correct insert into the dock. 2.
TROUBLESHOOTING GUIDE SYMPTOM CAUSE No power • Poor plug even when connection STANDBY is set to “ON” Will not work • iPod® is not docked with iPod® properly • iPod® input not selected No sound • Improper volume level • Speaker Set power off • System failure (require code matching) ACTION • Insert AC power plug firmly into AC outlet. • Choose correct insert and dock into system again. • Choose iPod® mode using the FUNCTION button. • Make sure that volume controls are set properly.
SPECIFICATIONS Supply Voltage Power Consumption RF Signal Frequency Power Output (speaker) Dimension Base Unit Speaker Set Net Weight Base Unit Speaker Set AC/DC Adaptor Input Output : : : : : : : : : : DC IN 9V ... 2 - 2.2A 18VA 2.4GHz 3W per channel 156 (W) x 228 (D) x 74 (H) mm 110 (Dia) x 200 (H) mm 0.77lbs 1.55lbs AC 120V ~ 60Hz DC 9V ... 2 - 2.2A * Design and specification are subject to change without notice. 10 IPB125 HJ580SA eng 09.
LIMITED WARRANTY Provided by: STARLITE CONSUMER ELECTRONICS (USA) INC. This warranty applies to products purchased in the United States and Canada. This is the only express warranty for this product and is in lieu of any other warranty of condition. Starlite warrants this product to be free from defects in material and workmanship within the following warranty period, starting from the date of sale to the original consumer purchase.
