Laser Printer Applications Manual
and scrollthrougha lowermenulevel.Andyoualsopress ENTER when
youwanttosaveaparticularmenuitcmasthevalueforacurrentparameter
setting.
Thethreelastmenuheadingsletyouloadoneversionoftheparametersinto
anotherversion.Two move the currentparametervalues into either the
initialor power-upparameters.The finalmenuoptiongoestheotherway,
lettingyouloadthe factoryparametersettingsas yourcurrentsettings.
CONTROLLING THE PRINTER
In thissectionyou’llmeettwo separatecontrolsoverhowthe StarLaser-
Printer8 itselfworks.The INTERFACEparametercontrolscommunica-
tionsbetweentheprinterandyourcomputer.AndtheCOMMANDparame-
terdetermines,amongotherthings,whichsetofcommandstheprinterwill
use. You can set theseINTERFACEandCOMMANDparameterson the
frontpanel.
The INTERFACE parameter
The INTERFACEparameter,the most basicof the Star LaserPrinter8’s
configurationsettings,defineshowyourcomputerconnectsto theprinter.
You can set the INTERFACEto either Serial or Parallel (in IBM or
Ccntronicsmode).Inmostsingle-computerenvironmentsyou’lloptforthe
fasterParallelinterface;in amulti-usernetworkyoumaybe betteroffwith
Serial. ~
The particular printer interface settingsdon’tmatter asmuch as making sure
theymatchthoseon yourcomputer.If youuseanMS-DOScomputer,you
can set yourcomputer’sparameterswiththe MODEcommand.See your
MS-DOSmanual.
MostMS-DOSand AT-compatiblecomputerssupportup to threeparallel
andtwo serialports,whichcomeonexpansionboardsyoupluginto your
computer.Whenyouinstallsuchboardsyoumustsetswitchesto indicate
thenumberandaddressesoftheseports.If youspecifythewrongaddresses,
youwon’tbe ableto print.
Serial interface: rate
If youaskfortheSerialinterfaceyou’llhavetotellyourprintermoreabout
howthedatawillbe comingin—in particularitsrateandunitsizeandthe
meaningsof anyspecialbits.
16