Printer CBM-820 User's Manual

– 52 –
ESC = n
[Function] Selects Peripheral Device
[Code] ASCII ESC = n
Hexadecimal 1B 3D n
Decimal 27 61 n
[Range] 0 n 3
[Outline] This command selects a peripheral device which validates the subsequent data, depending on
a value of n.
• Each bit has the following different meanings.
• If Printer Disabled has been selected, the printer will discard all the received data until Printer
Enabled is selected with this command.
[Caution] • Even if Printer Disabled has been selected, the printer may be made off-line by operating it.
[Default] n = 1
Bit Peripheral Device Hexadecimal Decimal
0 Printer Disabled 00 0
Printer Enabled 01 1
1 Undefined ––
2 Undefined ––
3 Undefined ––
4 Undefined ––
5 Undefined ––
6 Undefined ––
7 Undefined ––