User Guide

– 15 –

CODE

ESC R n

(1B)

H (52)H n

FUNCTION

Select an international character.

OUTLINE

This command selects one of the international character sets

in accordance with the value of “n” as shown below.

n = 0 : U.S.A. 3 : England 6 : Italy

1 : France 4 : Denmark 7 : Spain

2 : Germany 5 : Sweden 8 : Japan

International character set can be specified using the DIP

Switches. However, control code settings have priority.For

international characters, please refer to the character code

chart in Section 8, or to the font chart in Section 9.

CODE

ESC & 0 n1 n2 [m0 m1 m2 m3 m4 m5] n2-n1+1

(1B)H (26)H (00)H

1 n2 [m0 m1 m2 m3 m4 m5] n2-n1+1

FUNCTION

Define download character.

OUTLINE

In this section we will define “download characters”.

This printer is able to print the characters expressed by the

character codes in Section 8. In addition, the user can create

special characters, which are called download characters.

A maximum of ten download characters can be defined, and

the defined character pattern is stored in the printer’s RAM.

This means that if the power to the printer is turned off, stored

download characters are lost.

The range of positions in which download characters can be

written is expressed by n

1, n2. It is specified by the range

(21)

H n1 n2 (7F)H. When the download character

consists of one character, the expression becomes n

1 = n2.

0 expresses the relation between the character pattern and

the print head. (See following explanation.) m

1 ... m5 ex-

presses the character pattern.