Printer User Manual
Table Of Contents
- Surface
- English
- Notice
- About this manual
- Contents
- Chapter 1: Printer Setup
- Choosing a place for the printer
- Unpacking the printer
- General guide
- Installing the platen knob
- Opening the front cover
- Installing the ribbon cassette
- Removing the ribbon cassette
- Installing the paper guide
- Connecting to a power outlet and turning power on and off
- Loading fanfold paper
- Printing on fanfold paper
- Parking fanfold paper
- Unparking fanfold paper
- Using the tear-off function
- Connecting to your computer
- Chapter 2: Control Panel Operations
- Switching between on-line and off-line
- Selecting a font
- Entering the Font Lock Mode
- Setting the character pitch
- Entering the Pitch Lock Mode
- Line feed
- Paper eject (cut-sheet paper)
- Form feed (fanfold paper)
- Parking fanfold paper
- Micro feed
- Setting the top of form position
- Tear-off function (fanfold paper)
- Selecting the Quiet Print Mode
- Changing the auto load position
- Saving a macro
- Clearing the printer’s buffer
- Initializing the printer
- Chapter 3: Using the EDS Mode
- Chapter 4: User Setup Utility
- Installing the User Setup Utility
- Starting up the User Setup Utility
- Changing the General, Font, Paper and Adjust Settings
- Adjusting the dot alignment
- Changing the printer port
- Saving setup data in a configuration file
- Importing setup data from a configuration file
- Returning to default settings
- Exiting the User Setup Utility
- Using the Help menu
- Chapter 5: Using the Printer with Windows 3.1
- Chapter 6: Using the Printer with Windows 95
- Chapter 7: Using the Printer with OS/2 Warp
- Chapter 8: Using the Printer with MS-DOS
- Chapter 9: Paper Handling
- Appendix A: Troubleshooting
- Appendix B: Specifications
- Appendix C: Interface Pin Outs
- Appendix D: Character Sets
- Appendix E: Printer Control Codes
- Appendix F: Control Panel Operation Guide
- Francais
- Remarque
- A propos de ce manuel
- Table des matières
- Chapitre 1: Installation de l’imprimante
- Choix d’un emplacement pour l’imprimante
- Déballage de l’imprimante
- Schéma de l’imprimante
- Montage de la molette du cylindre
- Ouverture du capot avant
- Mise en place de la cartouche de ruban
- Retrait de la cartouche de ruban
- Installation du guide-papier
- Branchement sur une prise secteur et mise sous et hors tension
- Chargement du papier
- Mise en attente du papier continu
- Remise en circulation du papier continu
- Utilisation de la fonction de découpe
- Connexion de l’imprimante à votre ordinateur
- Chapitre 2: Utilisation du panneau de commande
- Alternance entre l’état en ligne et hors ligne
- Utilisation du panneau de commande
- Mode de verrouillage de la police
- Avance du papier
- Ejection du papier (feuilles séparées)
- Saut de page (papier continu)
- Mise en attente du papier continu
- Alimentation du papier par micro-lignes
- Réglage du début de page
- Fonction de découpe (papier continu)
- Sélection du mode d’impression silencieux
- Changement de la position de chargement automatique
- Sauvegarde des réglages du panneau de commande
- Vidage de la mémoire tampon de l’imprimante
- Réinitialisation de l’imprimante
- Chapitre 3: Utilisation du mode EDS
- Chapitre 4: Utilitaire d’impression
- Installation de l’utilitaire d’impression
- Exploitation de l’utilitaire d’impression
- Changement des réglages de généralités, de la police, du papier et des paramètres
- Réglage de l’alignement des points
- Changement du port de l’imprimante
- Sauvegarde des données dans un fichier de configuration
- Importation de données d’un fichier de configuration
- Retour aux réglages par défaut
- Sortie de l’utilitaire d’impression
- Utilisation du menu d’aide
- Chapitre 5: Utilisation de l’imprimante sous Windows 3.1
- Chapitre 6: Utilisation de l’imprimante sous Windows 95
- Chapitre 7: Utiliser l’imprimante avec le logiciel OS/2 Warp
- Chapitre 8: Utilisation de l’imprimante avec MS-DOS
- Chapitre 9: Manipulation du papier
- Annexe A: Dépannage
- Annexe B: Caractéristiques techniques
- Annexe C: Broches du connecteur interface
- Annexe D: Jeux de caractères
- Annexe E: Codes de contrôle de l'imprimante
- Annexe F: Guide de fonctionnement du panneau de commande
- Deutsch
- Eingetragene Warenzeichen
- Über dieses Handbuch
- Inhaltsverzeichnis
- Kapitel 1: Drucker-Setup
- Wahl eines Aufstellungsorts für den Drucker
- Auspacken
- Allgemeine Anleitung
- Befestigung des Walzendrehknopfes
- Öffnen der Frontabdeckung
- Einsetzen der Farbbandkassette
- Entnehmen der Farbbandkassette
- Ansetzen der Papierführung
- Anschluß an eine Steckdose und Ein-/Ausschalten der Netzversorgung
- Papier einlegen
- Drucken auf Endlospapier
- Die Papier-Park Funktion
- Fortsetzung des Endlospapier-Druckbetriebs
- Verwendung der Abreißfunktion
- Anschluß an den Computer
- Kapitel 2: Bedienfeld
- Umschalten zwischen Online- und Offline-Betrieb
- Wahl einer Schriftart
- Einstellen des Schriftart-Sperrmodus
- Einstellen des Zeichenabstands
- Einstellen des Zeichenabstand-Sperrmodus
- Zeilenvorschub
- Blattauswurf (Einzelblattpapier)
- Blattvorschub (Endlospapier)
- Papier-Park Funktion
- Mikro-Papiertransport
- Einstellen des Blattanfangs
- Abreißfunktion (Endlospapier)
- Einstellen des Leisedruckmodus
- Änderung der automatischen Papiereinzugposition
- Speichern der Bedienfeldeinstellungen
- Löschen des Druckerspeichers
- Initialisierung des Druckers / Reset
- Kapitel 3: Verwendung des EDS-Modus
- Kapitel 4: Drucker-Installationsprogramm
- Installierung des Drucker-Installations
- Starten des Drucker-Installationsprogramms
- Änderung der Einstellungen unter Allgem., Font, Papier, Justage und Port
- Änderung des Bidirektionalen Druckertests
- Änderung der Schnittstelle
- Speichern der Einstelldaten in einer Konfigurationsdatei
- Einlesen von Einstelldaten aus einer Konfigurationsdatei
- Rückstellung auf die Standardeinstellungen
- Verlassen des Drucker-Installationsprogramms
- Verwendung der Hilfe
- Einstellungen des EDS-Modus
- Einschalten des EDS-Modus
- Wahl einer Gruppe
- Wahl eines Schalters
- Änderung der Schaltereinstellung
- Ausdrucken der gegenwärtigen Schaltereinstellungen
- Verlassen des EDS-Modus
- EDS-Modus-Einstellungen
- Kapitel 5: Einsatz des Druckers unter Windows 3.1
- Kapitel 6: Drucker mit Windows 95 anwenden
- Kapitel 7: Der Einsatz des Druckers unter OS/2 Warp
- Kapitel 8: Verwendung des Druckers mit MS-DOS
- Kapitel 9: Papierhandhabung
- Anhang A: Fehlersuche
- Anhang B: Technische Daten
- Anhang C: Schnittstelleninformationen
- Anhang D: Zeichensätze
- Anhang E: Drucker-Steuercodes
- Anhang F: Steuerung über Bedienfeld
- Serviceleistungen in Deutschland
- Italiano
- Avvertenze
- Informazioni sul manuale
- Indice
- Capitolo 1: Installazione della stampante
- Scelta di una collocazione per la stampante
- Disimballaggio della stampante
- Guida generale
- Installazione della manopola del rullo
- Apertura del coperchio anteriore
- Inserimento della cartuccia del nastro
- Rimozione della cartuccia del nastro
- Installazione della guida della carta
- Collegamento ad una presa di corrente e accensione e spegnimento
- Caricamento della carta
- Stampa su carta in modulo continuo
- Parcheggio della carta in modulo continuo
- Riattivazione della carta in modulo continuo
- Uso della funzione di taglio
- Collegamento al computer
- Capitolo 2: Uso del pannello comandi
- Alternazione tra on-line e off-line
- Selezione del font
- Attivazione del modo font bloccato
- Selezione del passo di stampa dei caratteri
- Attivazione del modo passo di stampa bloccato
- Avanzamento di riga
- Espulsione carta (carta in fogli)
- Avanzamento pagina (carta in modulo continuo)
- Parcheggio del modulo continuo
- Avanzamento micrometrico
- Selezione della posizione di inizio stampa
- Funzione di taglio (carta in modulo continuo)
- Selezione del modo di stampa silenziosa
- Cambiamento della posizione di caricamento automatico
- Memorizzazione delle regolazioni del pannello comandi
- Liberazione del buffer della stampante
- Inizializzazione della stampante
- Capitolo 3: Uso del modo EDS
- Capitolo 4: User Setup Utility
- Installazione di User Setup Utility
- Lancio di User Setup Utility
- Cambiamento delle impostazioni generali, font, carta e Tarature
- Regolazione dell’allineamento dei punti
- Cambiamento della porta stampante
- Salvataggio dei dati di impostazione in un file di configurazione
- Importazione di dati di impostazione da un file di configurazione
- Ritorno alle impostazioni default
- Uscita da User Setup Utility
- Uso del menu Help
- Capitolo 5: Utilizzo della stampante con Windows 3.1
- Capitolo 6: Utilizzo della stampante con Windows 95
- Capitolo 7: Utilizzo della stampante con OS/2 Warp
- Capitolo 8: Uso della stampante con MS-DOS
- Capitolo 9: Gestione della carta
- Appendice A: Soluzione di problemi
- Appendice B: Specifiche tecniche
- Appendice C: Uscite terminali interfaccia
- Appendice D: Gruppi di caratteri
- Appendice E: Codici di controllo stampante
- Appendice F: Guida all’uso del pannello comandi
- Customer service information
- Customer response
33
Line feed
❏ Make sure the printer is off-line (ON LINE indicator is not lit).
❏ Press PAPER FEED once to feed paper one line. Holding down PAPER
FEED continually feeds paper, one line at a time, until you release the button.
Paper eject (cut-sheet paper)
❏ Make sure the printer is off-line (ON LINE indicator is not lit).
❏ While holding down PAPER FEED (which means the line feed operation is
being performed), press ON LINE and then release the two buttons.
The printer will automatically eject the sheet of paper that is in the printer.
Form feed (fanfold paper)
❏ Make sure the printer is off-line (ON LINE indicator is not lit).
❏ While holding down PAPER FEED (which means the line feed operation is
being performed), press ON LINE and then release the two buttons.
The printer will automatically feed the paper to the top of the next page.
Parking fanfold paper
❏ Make sure the printer is off-line (ON LINE indicator is not lit).
❏ While holding down the control panel’s FONT button, press the PAPER FEED
button.
❏ The printer automatically reverse feeds the fanfold paper until it is no longer in
contact with the platen.
Micro feed
Use the following operation to feed the paper in very small increments. This makes
it possible to align the print head exactly where you want it.
❏ Make sure the printer is off-line (ON LINE indicator is not lit).
❏ While holding down ON LINE, press PAPER FEED to feed the paper forward
or PITCH to feed the paper backward.
Avance du papier
❏ Assurez-vous que l’imprimante est hors ligne (voyant ON LINE éteint).
❏ Appuyez une fois sur PAPER FEED pour avancer le papier d’une ligne. Tenez
la touche PAPER FEED enfoncée pour que le papier continue d’avancer ligne
par ligne jusqu’à ce que vous relâchiez la touche.
Ejection du papier (feuilles séparées)
❏ Assurez-vous que l’imprimante est hors ligne (voyant ON LINE éteint).
❏ Tout en tenant la touche PAPER FEED enfoncée (ce qui signifie que le papier
avance), appuyez sur ON LINE, puis relâchez les deux touches.
L’imprimante éjecte automatiquement la feuille qui se trouve à l’intérieur.
Saut de page (papier continu)
❏ Assurez-vous que l’imprimante est hors ligne (voyant ON LINE éteint).
❏ Tout en tenant la touche PAPER FEED enfoncée (ce qui signifie que le papier
avance), appuyez sur ON LINE, puis relâchez les deux touches.
L’imprimante avance automatiquement le papier jusqu’au début de la page
suivante.
Mise en attente du papier continu
❏ Assurez-vous que l’imprimante est hors ligne (voyant ON LINE éteint).
❏ Tout en tenant enfoncée la touche FONT du panneau de commande, appuyez sur
la touche PAPER FEED.
❏ L’imprimante inverse automatiquement le défilement du papier jusqu’à ce qu’il
ne soit plus en contact avec le cylindre.
Alimentation du papier par micro-lignes
Vous pouvez faire avancer le papier par micro-lignes pour régler la position
d’impression plus précisément.
❏ Assurez-vous que l’imprimante est hors ligne (voyant ON LINE éteint).
❏ Tout en tenant la touche ON LINE enfoncée, appuyez sur PAPER FEED pour
faire avancer le papier ou sur PITCH pour le faire reculer.