Printer Users Manual

6.
7.
With the sprocketcovers open, thread the paper over the sprockets,
aligningholeswiththepinson the sprockets.
Adjustthespacingofthesprocketsby slidingthemalongthebar,using
the clamp lever at the back of each sprocketto release and lock the
sprocketinpositin(whentheleverisdown,thesprocketmaybe moved,
andwhenit is up, the sprocketis locked).
Smocket cover
Clamp lever
F/gun?1-12. Thread the fenfold paper over the sprockets.
8.
9.
Nowclosethesprocketcovers,againmakingsurethatthepapersprocket
holesare alignedwiththepinson thesprockets.If theyarenot aligned
properly,youwillhaveproblemswithpaperfeeding,possiblyresulting
in tearingandjammingof the paper.
Turnontheprinterusingtheswitchatthefrontoftheprinter.Theprinter
willbeep(indicatingthatthepaperis notyetfilly loaded).Thisis also
confirmedby the orange
POWER indicatorflashing.
10.Nowpressthe(
‘EER-ECT) button.The paperbailwillmoveclearof
thepaper,andthepaperwillbefed andadjustedpasttheprintheadto a
positionreadyforprinting.Thepaperbailwillbemovedbacktogripthe
paperagainsttheplaten,andtheprintheadwillmovetothestartposition.
11.Remounttherearcover.Holdittiltedupwardandinsertthefourtabsat
the front into their slots. Then rotate the cover downwards,pressing
downon thethumbpadson theleft and rightto snap it into place.
12