Printer User's Manual

Print hex-density 24-bit graphics
Mode ‘ASCII
Decimal Hexadecimal
Std.
<FS>
“Z”
nl d
28 90 nl nl
1C 5A n] n2
ml d m3 ..
ml d d ...
ml ml m3 ...
Prints 24-bitdot graphicsat 360 dots per inch horizontally.The
graphics image is 24 dots high and n] + n2 x 256 dots wide.
Maximumwidthis 8inches(2880dots).Inthedataml, m2,m3...
eachthreebytesrepresent24verticaldots.In theleftmostposition,
themostsignificantbitofml is thetopdot;theleastsignificantbit
ofm1is theeighthdotfromthetop;themostsignificantbitof m2
is the ninthdot;the least significantbit of m2 is the sixteenthdot
fromthetop;themostsignificantbit of m3is the seventeenthdot
fromthetop;theleastsignificantbitofm3isthebottomdot.Therest
ofdatais similar.Thenumberof databytesmustbe 3 x (nl + n2 x
256).Dotsbeyondtherightmarginareignored.At theend of dot
graphicsprinting,the printer returns automaticallyto character
mode.
Select graphics mode
Mode ASCII
Decimal Hexadecimal
Std.
<ESC> “*” nO nl
27 42 nO nl IB 2A nO nl
&
ml ml ...
n2 ml d ...
n2 ml d ...
Selectsoneof elevengraphicsmodesdependingonthevalueof nO
andprintsbit-imagegraphicsinthismode.See<ESC>“K”(for8-
bit graphics)or <FS>“Z” (for24-bitgraphics)for informationon
n], n2,ml, m2, ...
nO Graphicsmode
O 8-bitNormal-density
1
8-bitDouble-density
2 8-bitDouble-density,double-speed
3 8-bitQuadruple-density
4 8-bitCRTgraphics,modeI
6 8-bitCRTgraphics,modeII
32 24-bitNormal-density
33 24-bitDouble-density
38 24-bitCRTgraphics
39 24-bitTriple-density
40 24-bitHex-density
74
(60 dotsper inch)
(120dotsperinch)
(120dotsperinch)
(240dotsperinch)
(80 dotsper inch)
(90 dotsper inch)
(60 dotsper inch)
(120dotsper inch)
(90 dotsper inch)
(180dotsper inch)
(360dotsperinch)