- Micronics Co.. Ltd. Opration Manual printer LS-5 EX, LS-5 TT

2.4 CONNECTING THE POWER CORD

Make surethatthe power switch on the printer is set to OFF, then connect the

power cord to the printer and an AC power outlet as shown below:

1. Insert the power cord into the receptacle on the back of the m-inter.

2. Insert the power cord into a grounded outlet.

Only use the power cord supplied with the printer. Note that this power cord

isfitted with a ground pin. This grounding is an important safety feature and

should not be ignored. If a suitable grounded socket is not available, contact

a qualified electrician to rectify the situation.