Multi-Font User's Manual

OTHER PRINTER COMMANDS
Set MSB to 1
Mode
ASCII
Decimal
Hexadecimal
Std.
<Esc> 3” 27 62
18 3E
Sets the most significant bit of each subsequent byte received to 1,
allowing users with a 7-bit interface to access characters with ASCII
codes greater than 127.
Set MSB to 0
Mode ASCII
Decimal
Hexadecimal
Std. <ESC> “=” 27 61
1B 30
Sets the most significant bit of each subsequent byte received to 0.
Accept MSB as is
Mode
ASCII
Decimal
Hexadecimal
Std.
cESC> “#,, 27 35
IB 23
Cancels the preceding commands and accepts the most significant
bit as it is sent to the printer.
Delete last character sent
Mode ASCII Decimal
Hexadecimal
Std. <DEL>
127
7F
Deletes the last character received. Ignored if the last character
received has already been printed, or if the last character received
was all or part of a command.
Cancel last line
Mode ASCII Decimal
Hexadecimal
Both <CAN> 24
18
Deletes the last line currently present in the print buffer.