Multi-Font User's Manual
Table Of Contents
- 挀漀瘀攀爀
- 䠀伀圀 吀伀 唀匀䔀 吀䠀䤀匀 䴀䄀一唀䄀䰀
- 吀䄀䈀䰀䔀 伀䘀 䌀伀一吀䔀一吀匀
- 䌀栀愀瀀琀攀爀 䤀一吀刀伀䐀唀䌀吀䤀伀一
- 䌀栀愀瀀琀攀爀 ㈀ 匀䔀吀吀䤀一䜀 唀倀 吀䠀䔀 倀刀䤀一吀䔀刀
- 䌀栀愀瀀琀攀爀 ㌀ 伀倀吀䤀伀一䄀䰀 䄀䌀䌀䔀匀匀伀刀䤀䔀匀
- 䌀栀愀瀀琀攀爀 㐀 倀䄀倀䔀刀 䤀一匀吀䄀䰀䰀䄀吀䤀伀一 䄀一䐀 唀匀䔀
- 䌀栀愀瀀琀攀爀 㔀 䌀伀一吀刀伀䰀 倀䄀一䔀䰀 伀倀䔀刀䄀吀䤀伀一匀
- 䌀栀愀瀀琀攀爀 㘀 匀䔀吀吀䤀一䜀 吀䠀䔀 䴀䔀䴀伀刀夀 匀圀䤀吀䌀䠀䔀匀
- 䌀栀愀瀀琀攀爀 㜀 倀刀䤀一吀䔀刀 䌀伀一吀刀伀䰀 䌀伀䴀䴀䄀一䐀匀
INTERFACE CARTRIDGES
You can use the RS-232 Serial Interface with the optional Serial Interface
Cartridge (IS-8XL), or extend the print buffer by installing the .optional
Buffered Parallel Interface Cartridge (IP-128XL), instead of the Standard
Interface Cartridge.
If you want to use the Serial Interface Cartridge, set the DIP switches on the
board before install it to the printer.
1. Turn off the power switch and disconnect the power cord from the power -
source.
2. Disconnect the interface cable if attached.
, -
3. Compress the projected parts on the right and left, and pull the Standard
Interface Cartridge to remove it from the printer.
-
Flgurr 312. Remove the Standard Interface Cartridge from the printer.
4. Insert the optional Interface Cartridge securely into place. If it is not fully
inserted, the printer will not properly print.
5. Connect the interface cable to the connector.
NOTE : Store the removed Interface Cartridge in a safe place.
-
22
-